How do you trim solid in Catia?

How do I cut a surface in CATIA v5?

The Basic Split

Fire up the command, pick the surface that is to be cut down, then click the items that will be used to cut it. In the image below, I want to cut the blue surface and use the yellow one to chop it down.

How do you cut in CATIA?

CATPart document.

1. Click Slicing Group . …
2. Select the solid you want to slice.
3. Select the zones group corresponding to the solid: the thickness of the solid must correspond to the thickness laws of the zones.
4. Select a Slicing Method :

How do you slice parts in CATIA?

Cutting the Part by the Sketch Plane

1. Double-click Sketch. 2 from the geometry. …
2. Move the sketch so that you can see the whole part.
3. Click Cut Part by Sketch Plane from the Visualization toolbar.

How do you cut part of half in Catia?

CATPart document.

1. Click Split . The Split Definition dialog box appears.
2. Select the element to be split. You should make your selection by clicking on the portion that you want to keep after the split. …
3. Select the cutting element. A preview of the split appears. …
4. Click OK to split the element.

How do you cut materials in CATIA?

You can remove material using split and trim command. Split simply cuts the material and trim is the combination of trim and join. If you want to trim, join and give fillet to material, use shape fillet command.

How do I cut an assembly in CATIA?

Reusing Assembly Design Splits

In this case, you just need to select the existing assembly split, click the Assembly Split icon and then select a face. Only the Assembly Features Definition dialog box appears to let you determine the parts of interest.

How do you use the pocket surface in Catia?

Creating Pads or Pockets from Surfaces

1. Select Extrude. 1 as the surface to be extruded. The different surfaces you can select are: …
2. Click Pad . The Pad Definition dialog box appears. You need to define an extrusion direction. …
3. Click the Reference field and select Plane. 1 as the plane defining the extrusion direction.