How do you switch part in Civil 3D?

What does the Swap Part command do in Civil 3D?

You can use the Swap Pressure Network Parts command to change the type, family, and/or size of selected parts in a pressure network.

How do you switch edges in Civil 3D?

In Toolspace, on the Prospector tab, expand the surface Definition collection, right-click , and click Swap Edge. At the command line, you are prompted to select an edge (line) to swap. Click the edge to swap it.

What is part list in Civil 3D?

To create a parts list. A part list is a subset of available parts in a catalog. It provides quick access to just the parts you need for a specific project. In Toolspace, on the Settings tab, expand the Pipe Networks collection, right-click Parts List, and click New. The Network Parts List dialog box is displayed.

How do you create or subdivide parcels interactively?

To Create Parcels by Subdividing

1. Click Home tab Create Design panel Parcel drop-down Parcel Creation Tools Find.
2. On the Parcel Layout Tools toolbar, click to expand the toolbar. …
3. Click for the Slide Line – Create tool.
4. In the Create Parcels – Layout dialog box, specify any changes to the default settings.

How do you adjust parcel display order?

To Change Parcel Display Order

1. Click the site parcels area label in the drawing. …
2. Right-click and click Parcel Properties.
3. In the Site Parcel Properties dialog box, click the Composition tab.
4. On the Composition tab, under Parcel Style Display Order, change the list positions of styles listed there.

When adding contours to a surface What does swapping edges do?

Swapping Edges



The process continues until no more swapping is possible. This command reverses the direction of a TIN line between four adjacent surface points. To perform this operation, ensure that the surface style has points visibility enabled.

How do you create triangulation in Civil 3D?

Creating a Triangulation Surface

1. Click Home tab Create Ground Data panel Surfaces drop-down Create Surface . …
2. Click to select a layer. …
3. In the properties grid, click the Value column for the Name property and enter a name for the surface.

How do you use part builder in Civil 3D?

About Creating Parts With Part Builder

1. Specify the part configuration. You work in the parametric building environment to create single pipe network parts. …
2. Create a 2D or 3D model of the part. …
3. Generate a preview image and define the insertion position of the part. …
4. Validate and save the part.

How do I add parts to a parts list?

In the Select Parts List dialog box, click Edit Current Selection. In the Network Parts List dialog box, on the Structures tab, right-click the parts list name in the tree view. Click Add Part Family.

How do I create multiple parcels in Civil 3D?

Create multiple parcels simultaneously

1. In the Parcel Layout Tools toolbar, click Slide Line – Create.
2. Under Automatic Layout, specify the following parameters: …
3. Click the area label for the large parcel on the south side of the site.
4. Specify the start and end points of the parcel frontage as shown in the following image.