How do you show a tangent line in Solidworks drawing?

What is a tangent edge solidworks?

Tangent edges are transition edges between rounded or filleted faces in drawing views in Hidden Lines Removed or Hidden Lines Visible display modes. The most commonly seen tangent edges are the edges of fillets.

How do you hide tangent edges in Solidworks drawing?

To change this on your system, go to Tools > Options, then under the System Options tab, select Display/Selection from the list on the left, then in the “Part/Assembly tangent edge display” choose “As Phantom.” Other options include “As visible” (the default setting) or “Removed” (see below).

How do you hide fillet lines in Solidworks drawing?

To hide or show edges in a drawing:

1. Click Hide/Show Edges. …
2. Select the edges to hide (you can select edges individually, or use box selection), then click . …
3. To show edges, click Hide/Show Edges. …
4. Select the hidden edges highlighted in orange, (you can select edges individually, or use box selection), then click .

Where is the line format toolbar in Solidworks?

If you’re going to be making a lot of changes, it may be convenient to enable the Line Format toolbar by clicking on View > Toolbars > Line Format. You’ll not only have access to the tools mentioned above but layers as well.

How do I delete hidden lines in Solidworks?

Hidden Lines Removed

1. Click Display Style > Hidden Lines Removed (Heads-up View toolbar).
2. Click Hidden Lines Removed (View toolbar).
3. Click View > Display > Hidden Lines Removed.

How do drawings show fillets?

Double-click the drawing background to display the General arrangement drawing properties dialog box. Click Part or Pour object. If you need to change part representation for profiles, select Exact from the Part representation list. Under Additional marks, select the Fillet edges on/off check box.

What is the difference between a fillet and a chamfer?

Fillets describe rounded corners of a design (or part) that help to reduce stresses and prevent rapid deformation at the corners of the part. In contrast, chamfers are sloped or angled edges (usually at 45° or 60° ) of a design or part.

What are fillets in engineering drawing?

In mechanical engineering, a fillet is a rounding of an interior or exterior corner of a part design. An interior or exterior corner, with an angle or type of bevel, is called a “chamfer”.

How do I make hidden lines visible in Solidworks?

Click Tools > Options > System Options > Display. Select Solid or Dashed for Hidden edges displayed as. Click OK.

How do I show a construction line in Solidworks?

Click Construction Geometry. on the Sketch toolbar. Click Tools > Sketch Tools > Construction Geometry. Select the For construction check box in the PropertyManager.

How do you show hidden lines in Solidworks 2020?

To control how hidden edges are displayed:

1. Click Tools > Options > System Options > Display.
2. Select Solid or Dashed for Hidden edges displayed as.
3. Click OK.