How do you make reference planes visible in Revit?

Why are some reference lines not visible?

Gridlines or Reference Planes Are Not Visible

See Project Browser. Gridlines and reference planes must be below the cut plane of a view in which they are to display. Verify that the cut plane is not set at too low a depth in the view range. See Modify the View Range.

How do I make components visible in Revit?

Click View tab Graphics panel (Visibility/Graphics). On the Model Categories tab and Annotation Categories tab, check the Visibility settings for the types of elements that you added. If visibility for these elements is turned off, select the Visibility check box to make them visible.

Do reference planes print in Revit?

Reference planes, crop boundaries, and scope boxes are hidden for printing by default. To show them when you print, click Print (Print Setup).

How do you pin a reference plane in Revit?

You can use the “pin” tool on them. Select the referecne plane you want to hold in place and then on the modify panel on the ribbon select the “pin” icon or use the keyboard shortcut of “PN”. The reference plane will now have a pushpin icon displayed when selected and will not be able to be moved.

How do I unhide a link in Revit?

Reveal hidden elements: Open the view in the host model and click (Reveal Hidden Elements) on the View Control Bar. The drawing area displays a magenta border, and hidden elements display in magenta. If the linked model displays in magenta, right-click it, and click Override Graphics in View By Category.

Why is section not visible in Revit?

To make the section marker visible use one of the following options: Adjust the scale of the view, so that the section marker displays. Adjust the “Hide at scales coarser than” parameter so that the section marker will display without changing the scale of the view.

Why is my visibility graphics greyed out in Revit?

The Visibility/Graphics window will be greyed out (as shown above) if its included in the View Properties of the View Template. So make sure you go into the View Template and update the Visibility/Graphics or change settings to not included Visibility/Graphics.

How do you make a reference plane?

Use the Line tool or the Pick Line tool to draw a reference plane.

1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) …
2. To draw a line: On the Draw panel, click (Line). …
3. To pick an existing line: On the Draw panel, click (Pick Lines).

What is the difference between reference plane and reference line in Revit?

What is the difference between reference planes and reference lines? A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.

How do you change a reference plane?

Select a work plane-based element in a view. Click Modify | <Element> tab Work Plane panel (Edit Work Plane).
…
In the Work Plane dialog, select another work plane.

1. Name—Choose an available work plane from the list, and click OK. …
2. Pick a plane—Revit creates a plane coincident to the selected plane.