How do you lock a circle to reference plane in Revit?

Go to the Modify tab and select the Align command from the Modify panel. You can now select the vertical reference plane, then the little cross at the circle centerpoint to lock the circle to that plane. Repeat the Align command to lock the circle to the horizontal reference plane.

How do you lock an element to a reference plane in Revit?

Add a Reference Plane

1. On the Draw panel, click (Pick Lines).
2. On the Options bar, specify an offset, if desired.
3. Select the Lock option to lock the reference plane to the line.
4. Move the cursor near the line to which you want to place the reference plane and click.

How do you lock something in Revit?

Open the Revit Server Administrator. In the tree control, select the item, and click (lock). Note: If you use the command-line utility to apply a lock, the lock icon displays after a refresh operation, and information about the model in use displays in the right pane.

How do reference planes work in Revit?

Use the Line tool or the Pick Line tool to draw a reference plane.

1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) …
2. To draw a line: On the Draw panel, click (Line). …
3. To pick an existing line: On the Draw panel, click (Pick Lines).

How do you create a work plane in Revit family?

In the Family Editor, click Create tab Properties panel (Family Category and Parameters). In the Family Category and Parameters dialog, under Family Parameters, select Work Plane-Based. Click OK. Note: You can make a family both work plane-based and always vertical.

Where are reference planes in Revit?

On the ribbon, click (Reference Plane). To draw a line: On the Draw panel, click (Line). In the drawing area, draw the reference planes by dragging the cursor.

How do you draw a circle in Revit 2021?

Draw a circle by specifying its center point and the radius.

1. Select a tool that allows for a circle. …
2. Click Modify | Place Lines tab (or respective Modify | Place tab or Modify | Create tab) Draw panel (Circle).
3. On the Options Bar: …
4. Click in the drawing area to place the circle.

How do I cut a circle in Revit?

When selecting an element that needs to be trimmed to form the corner, make sure you click the part of the element to be retained. click Modify tab Modify panel (Trim/Extend Single Element). Select the reference to use as a boundary. Then select the element to trim or extend.

Can you lock an image in Revit?

Revit LT displays a pushpin control near the element to indicate that it is pinned in place. To move or delete the element, you must first unlock it by clicking the pushpin control. Click the pushpin again to lock the element.

How do you lock a column in Revit?

Lock Columns to a Grid

1. Select the columns to lock to the grid.
2. On the Properties palette, under the Constraints section, select the following: Vertical Columns: Moves with Grids. …
3. Click Apply. Locked vertical columns may still be moved and modified but they will proportionately move with the grid if it is repositioned.

How do I lock a family in Revit?

You can’t lock a family, BUT, You can lock a family workset, so other will not be able to modify them. Simply make the families workset editable, and don’t relinquish that workset.

How do you select planes in Revit?

Select a work plane by name, by picking a plane, or by picking a line in the plane you want to select. On the ribbon, click (Set). In the Work Plane dialog, under Specify a new Work Plane, select one of the following options: Name—Choose an available work plane from the list, and click OK.