How do you hide a point in Solidworks?

How do you hide sketch points in Solidworks drawing?

To hide a sketch in a drawing, right-click the sketch in the graphics area or in the FeatureManager design tree and select Hide.

How do you hide a hole in Solidworks?

Right-click a feature or component in the drawing view or in the FeatureManager design tree and select Show/Hide, Show Hidden Edges. If the hidden edges are visible, you can hide them again by right-clicking the feature or component and selecting Show/Hide, Hide Hidden Edges.

How do you hide lines in Solidworks drawing?

To hide or show edges in a drawing:

1. Click Hide/Show Edges. …
2. Select the edges to hide (you can select edges individually, or use box selection), then click . …
3. To show edges, click Hide/Show Edges. …
4. Select the hidden edges highlighted in orange, (you can select edges individually, or use box selection), then click .

Why can’t I see my sketches in Solidworks?

Having heard this issue from a few customers, it should be noted that the trick is that the sketch has to be set to “Hide” in the part level and then in the drawing level, that sketch could be set to “Show” for any specific drawing view.

How do I show a sketch in Solidworks drawing?

Inserting Sketch Picture in Drawings

1. Click Sketch Picture. (Sketch toolbar) or Insert > Picture.
2. In the Open dialog box, browse to an image file, then click Open.
3. Select options in the Sketch Picture PropertyManager, then click. .

How do you show the intersection point in Solidworks drawing?

In an open sketch, hold down Ctrl and select two sketch entities. (Sketch toolbar) or click Tools > Sketch Entities > Point. A virtual sharp appears at the point where the sketch entities would intersect. Set the virtual sharp display style in Tools > Options > Document Properties > Virtual Sharps.

How do I use collision detection in Solidworks?

Click Move Component or Rotate Component (Assembly toolbar). In the PropertyManager, under Options, select Collision Detection. If the component you are moving touches any other component in the assembly, the collision is detected. Select components for the Components for Collision Check box, then click Resume Drag.

How do you intersect lines in Solidworks?

Intersection curve lives in Tools > Sketch Tools > Intersection Curve. Once the tool has started, select the plane if not already selected, then all the faces the plane intersects that you want sketch lines through. Finish selecting all the faces for the plane to intersect to make sketch entities.

How do you hide a bend line in Solidworks?

Toggling the Visibility of Bend Lines

1. In the FeatureManager design tree, expand Drawing View to show the Flat-Pattern. feature.
2. Expand the Flat-Pattern. feature, right-click Bend-Lines and select Show or Hide.

How do you show hidden lines in Solidworks 2020?

To control how hidden edges are displayed:

1. Click Tools > Options > System Options > Display.
2. Select Solid or Dashed for Hidden edges displayed as.
3. Click OK.

How do you delete lines in Solidworks?

To delete: Click the line or text and press the Delete key. To move: Click the line or text and drag to a new location.