Can you bend a part in SolidWorks?
The Bends PropertyManager allows you to convert a shelled part to a sheet metal part. To use the Bends PropertyManager to convert a part to sheet metal: Click Insert Bends (Sheet Metal toolbar) or click Insert > Sheet Metal > Bends.
How do I curve a part in SolidWorks?
To create a sketched bend feature:
- Sketch a line on a planar face of the sheet metal part. …
- Click Sketched Bend. …
- In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
- Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .
How do I stretch a part in SolidWorks?
Stretching Sketch Entities
- Click Base point. and then click on the sketch to set a base point.
- Drag to stretch the sketch entities. When you release, the entities stretch to that point and the PropertyManager closes.
What is a flexible assembly SolidWorks?
By default, when you create a subassembly, it is rigid. Within the parent assembly, the subassembly acts as a single unit and its components do not move relative to each other. However, you can make subassemblies flexible. This allows movement of the individual components of a subassembly within the parent assembly.
How do you change the bend axis flex in Solidworks?
Example of Flex Bending
- Move the pointer over the triad arrows to display the drag/rotate pointer. . …
- Move the pointer over the trim plane manipulators to display the move pointer . …
- Move the pointer over the edge of the trim planes to display the bending pointer .
- Drag the trim planes to bend and modify the flex feature.
How do I flatten bends in SolidWorks?
Flattening Sheet Metal Bends
- To flatten the entire part, if the Flat-Pattern1 feature is present, unsuppress Flat-Pattern1, or click Flatten. …
- To flatten the entire part, if the Process-Bends1 feature is present, suppress Process-Bends1, or click Flatten. …
- To flatten one or more individual bends, add an Unfold.
What is curved face?
The curved surface is a rounded surface which is not flat. Curved Surface. Flat Surface. An object can have a curved surface all around it. Such objects have only one surface throughout.
How do I use the Deform tool in SolidWorks?
To open the Deform PropertyManager with Surface Push options:
- Click Deform. on the Features toolbar, or click Insert > Features > Deform.
- In the PropertyManager, under Deform Type, select Surface Push.