How do you do a corner relief in Solidworks?

How do you make a corner relief in Solidworks?

Adding a Corner Relief

1. Click Corner Relief. …
2. In the Corner Relief PropertyManager, under Corner Type, select a two or three bend corner.
3. Under Scope , select the sheet metal body to which to apply the corner relief.
4. Under Corners , click Collect all corners to list all corners in the sheet metal body.

What is a corner relief?

About Corner Relief. Use the Corner Relief tool to add relief to one or more corners of a sheet metal part. When you add relief, sheet metal sections are removed from the model. You can apply corner relief automatically to all corners or manually to individual sets of corners.

How do you weld corners in Solidworks?

To add weld beads to a sheet metal corner:

1. Click Welded Corner. (Sheet Metal toolbar) or Insert > Sheet Metal > Welded Corner.
2. Select one of the corner faces.
3. Set options in the PropertyManager.
4. Click . Welded corners are suppressed in the flattened state.

How do I use the edge flange in Solidworks?

Adding Edge Flanges

1. In an open sheet metal part, click Edge Flange. (Sheet Metal toolbar) or Insert > Sheet Metal > Edge Flange.
2. In the graphics area, select one or more edges for Edge . There are specific requirements for adding edge flanges to curved edges. …
3. Set options in the Edge-Flange PropertyManager and click .

How do you create a relief cut in Solidworks?

Changing Auto Reliefs

1. In the FeatureManager design tree, right-click the feature bend you want to edit, and select Edit Feature.
2. In the PropertyManager, select Custom Relief Type.
3. Under Custom Relief Type: Set a relief cut in Relief Type. If you selected Rectangle or Obround, change the values for Relief Width. …
4. Click .

What is corner setting?

The corner setting technique and bottoming process were designed for experiments. The corner setting technique and bottoming has reduced the thickness in bending area to 5, 10, 15 and 20 percent of the original sheet thickness. Clearance between punch and die of both processes was equal to same the thickness.

What is relief ratio in Solidworks?

Relief Ratio



The distance d represents the width of the Rectangular or Obround relief cut and the depth by which the side of the Rectangular or Obround relief cut extends past the bend region. The distance d is determined by the following equation: d = (relief ratio) * (part thickness)