How do you cut extrusions in Revit?

How do you cut in Revit?

Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK. Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry).

How do you cut multiples in Revit?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry) and select the void you created. Notice the cursor changes shape. Select the geometry you created in Step 3. Note: Select Multiple Cut on the options bar to select more than one element to be cut by the void.

How do you cut a shape out of a wall in Revit?

Cut a Rectangular Opening in a Wall

1. Open an elevation or section view where you can access the wall that will host the opening.
2. Click (Wall Opening). Where is it? …
3. Select the wall that will host the opening.
4. Sketch a rectangular opening. …
5. To modify an opening, click Modify, and select the opening.

How do you edit Geometry in Revit?

Edit Part Geometry

1. In the drawing area, select the part whose geometry you want to edit.
2. On the Properties palette, under Identity Data, select the Show Shape Handles option.
3. Drag the shape handles on planar faces to edit part geometry as needed.

How do I cut a void in family in Revit?

Cutting with voids in families when loaded

1. Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters.
2. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK.
3. Load the family into the project and place it.

How do you make a void family in Revit?

Create a Void Family with an Elliptic Profile

1. Create a new family using the Metric Generic Model face based. …
2. Select the 3D Front view.
3. Click Create tab Datum panel (Reference Plane).
4. Place a new horizontal reference plane in the middle of the slab extrusion:
5. Select the new reference plane.
6. In the Properties palette:

How do you cut a void wall in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

How do I edit walls in Revit?

Edit a Wall Profile

1. In the drawing area, select the wall, and click Modify | Walls tab Mode panel Edit Profile.
2. If the active view is a plan view, the Go To View dialog displays, prompting you to select an appropriate elevation or section view. …
3. Use the tools on the Modify and Draw panels to edit the profile as needed.

Where is geometry in Revit?

On the Modify ribbon, in the Geometry panel, click Join Geometry. Revit prompts you to select the solid geometry to be joined. Select the floor and then the wall on the left.

How do you edit extrusions in Revit?

Edit an Extrusion

1. In the drawing area, select the extrusion.
2. If you are in the project environment: …
3. Click Modify | Extrusion tab Mode panel (Edit Extrusion).
4. If desired, modify the extrusion profile.
5. On the Properties palette, change the visibility, material, or subcategory of the extrusion, if desired.