How do you create a cut and fill table in Civil 3D?

What is cut and fill method?

In earthmoving, cut and fill is the process of constructing a railway, road or canal whereby the amount of material from cuts roughly matches the amount of fill needed to make nearby embankments, so minimizing the amount of construction labor.

How do I fill an area in Civil 3d?

To Hatch or Fill Objects or Areas

1. Click Home tab Draw panel Hatch. …
2. On the Properties panel Hatch Type list, select the type of hatch you want to use.
3. On the Pattern panel, click a hatch pattern or fill.
4. On the Boundaries panel, specify the how the pattern boundary is selected: …
5. Click an area or object to be hatched.

How do you create a table in CAD?

Have You Tried: Creating Tables

1. Enter TABLE at the Command prompt.
2. In the Insert Table dialog box, enter 4 columns and 3 data rows. …
3. Click outside the table, and then select it on an edge to display its grips.
4. To change the size and shape of the table, click the dark blue triangular grips.

How do you create a revision table in AutoCAD?

Create a Revision Table in AutoCAD

1. Type vltrevblock in the command line and press Enter. Note: The mapped fields for a Vault Revision Table on a non-vaulted drawing are displayed as empty to reflect the null state of information in the vault.
2. Click on a position in the drawing area to place the Vault Revision Table.

How do you create an alignment table in Civil 3d?

Adding Alignment Tables

1. Click Annotate tab Labels & Tables panel Add Tables menu Alignment Add Line .
2. In the Table Creation dialog box, select a Table Style and a Table Layer.
3. Specify the label styles or select labels in the drawing to create a tag child style for the labels.
4. Select the Apply check box.

How do you do cut and fill calculations by hand?

This method involves drawing horizontal and vertical lines over your site plan to divide it into grid cells of equal size. You then include the existing elevation and proposed elevation for each corner of the grid cells, and work out the difference between the two, as this will be cut or fill depth for that spot.

How do you calculate backfill and excavation?

Backfill for Figure 3.1:

1. Backfill volume = excavation volume – footing volume – wall volume. …
2. (Note that only the portion of the wall that is in the trench is deducted, so the height of wall in the trench is the average trench depth minus 2′-0” for the footing: 6′-0” – 2′-0” is 4′-0”)
3. Backfill volume = 207.4 cubic yards.

What is cut and fill volume?

The cut portion is the volume between the upper and lower surface when the upper surface is above the lower surface. The fill portion is the volume between the upper and lower surfaces when the upper surface is below the lower surface.