How do you close a mesh in Fusion 360?

How do you close a mesh in fusion?

Right click the mesh body in the browser tree of the Model workspace and select “Triangulate Mesh.” You will then be able to close the mesh body.

How do you close a Fusion 360 form?

Fusion 360 | Autodesk Knowledge Network.

…

Use the Loft command to cap/close an open ended body;

1. Surface tab.
2. Loft.
3. Select Outer and inner profile.
4. OK.

How do you fill gaps in Fusion 360?

General Usage Instructions

1. Press the “Fill Gaps” button in the “Sketch” panel.
2. Enter a gap width. …
3. Select the fill or join mode. …
4. Check the delete double checkbox to delete double lines. …
5. Check the project geometry checkbox to project the geometry to a new sketch. …
6. Press “OK” button.

How do you use a mesh in Fusion 360?

How to insert a mesh body into Fusion 360

1. Select the mesh file from your computer to insert.
2. Click Open.
3. In the Insert Mesh dialogue, ensure that the import units match the units from the mesh source file. STL and OBJ files are unitless, which means that they use an absolute value on import.

How do you switch from surface to solid in Fusion 360?

On the toolbar, navigate to the Surface tab. On the Modify panel, click Stitch, and the dialog displays. You can adjust the settings or click OK. If the faces can be stitched together to form a watertight solid, the body in the browser will switch from a surface body to a solid body.

How do you simplify mesh in Fusion 360?

Use the Reduce command to reduce the number of faces on a mesh body in Fusion 360 to minimize complexity.

1. In the Design workspace, on the Mesh tab, select Modify > Reduce . …
2. In the canvas, select a mesh body or face groups on a mesh body.
3. In the dialog, select a reduction Type and adjust associated settings: …
4. Click OK.

Where did mesh to BRep go?

Solution: Mesh to BRep is no longer a workflow. As of July 2021, you will now use “Convert Mesh” in the new Mesh tools. See our step-by-step tutorial on YouTube.

How do you get a gap in sketch Fusion 360?

You can find the gap quite quickly by drawing a few lines. Open profile. Horizontal line shows gap is in top half. Vertical line shows gap is in left corner of profile.