How do you change isometric view in Solidworks?

How do you change the view orientation in SolidWorks?

To display the Orientation dialog box, do one of the following:

1. Click View Orientation (View toolbar).
2. Click View > Modify > Orientation.
3. Press the Space Bar.
4. Right-click in a drawing sheet and select Zoom/Pan/Rotate > View Orientation.

How do I change the coordinate system in Solidworks?

Moving a Coordinate System

1. Click Coordinate System (Reference Geometry toolbar) or Insert > Reference Geometry > Coordinate System .
2. Define the coordinate system at a location on the part or assembly that provides the entities you need to control the angle and direction of each axis.

Can you flip isometric view SolidWorks?

(View toolbar), or right-click the view and select Zoom/Pan/Rotate > Rotate View. The Rotate Drawing View dialog box appears. Do one of the following: Drag the view to the desired rotation.

How do I mirror an isometric view in SolidWorks?

To mirror drawing views:

1. In the drawing environment, select a Model, Relative to Model, or Predefined drawing view;
2. In the Drawing view PropertyManager, in the mirror panel, select Mirror view;
3. Under Mirror view, select Horizontal or Vertical.

How do you get Trimetric view in SolidWorks?

Click Tools > Customize and select or clear Use Large Tooltips to enable or disable the view previews. flyout button in the Orientation dialog box to select axonometric (isometric, dimetric, or trimetric) views and to set which type of axonometric view is displayed when you select a View Selector corner.

How do you use alternate position view?

Insert a model view of the assembly using the orientation needed for the Alternate Position View. Position the assembly in its starting position. (Drawing toolbar), or click Insert > Drawing View > Alternate Position. The Alternate Position PropertyManager appears.

How do I align a section view in SolidWorks?

You can pre-select sketch entities that belong to the drawing sheet to create aligned section views. The sketch entities do not have to belong to an existing drawing view. To create an aligned section view: Click Aligned Section View on the Drawing toolbar, or click Insert, Drawing View, Aligned Section.

How do I switch between part and assembly in SolidWorks?

To replace one or more components:

1. Do one of the following: Click Replace Components (Assembly toolbar). Click File > Replace. …
2. Set options as described below, then click . The selected component instances are replaced. If you chose Manually select, choose the configuration to open in the Configurations dialog box.

How do you change the front plane in SolidWorks?

Select the sketch in the FeatureManager design tree, and click Edit, Sketch Plane. Right-click the sketch in the FeatureManager design tree, and select Edit Sketch Plane . Select a new plane in the FeatureManager design tree or select a new planar face in the model for Sketch Plane/Face . Click OK .

How do I find coordinates in SolidWorks?

Click Tools > Inquiry > Get Coordinate (or type GetXY). In the graphics area, select the point to identify.