How do you annotate threads in Solidworks?

How do you mark a thread in Solidworks drawing?

To insert cosmetic threads from assembly documents into drawings, click Insert > Model Items and click Cosmetic thread . In drawings, Insert Callout appears in the shortcut menu.

How do I show thread details in Solidworks?

To get there go to Tools > Options > Document Properties . In the Detailing section, there are two options that need to be selected, ‘Cosmetic threads’ and ‘Display annotations’. If you are looking to add a shaded view of cosmetic threads in the hole, the option ‘Shaded cosmetic threads’ will also need to be selected.

How do I edit a thread in Solidworks?

Editing Cosmetic Threads

1. In a part or assembly document, right-click the Cosmetic Thread feature and click Edit Feature .
2. Make the necessary changes in the Cosmetic Thread PropertyManager, and click .

How do you dimension a thread?

Creating Thread Dimensions

1. Click Thread Dimension in the Dimensioning toolbar ( Dimensions sub-toolbar). …
2. Select the thread to be dimensioned in the front view. …
3. Click Thread Dimension again.
4. In the section view B-B, select one of the two lines representing the thread to be dimensioned.

How do I make threaded holes in Solidworks?

Start by creating a cylindrical extrusion or cylindrical hole, much like the initial steps to of making a cosmetic thread. The feature size should be the same as the nominal thread diameter. From there, select the starting edge. Then, click “Insert” then “Feature” and “Thread.” This will automatically create a thread.

How do you add threads in Solidworks?

Creating a Cut Thread

1. Open a part file. The diameter of the cylinder is 6mm. …
2. Click Insert > Features > Thread .
3. In the graphics area, select the top edge of the cylinder.
4. In the PropertyManager, under Specification: …
5. Under Thread Location: …
6. Under End Condition, click Maintain Thread Length. …
7. Click .

How do you add threads in Solidworks 2020?

To create a cut thread:

1. Open a model with a cylindrical part and click Insert > Features > Thread .
2. In the graphics area, select a circular edge.
3. In the PropertyManager, under Specification, set values for the following: …
4. For Thread method, click Cut thread. …
5. Set the starting position of the Thread Location:

How do I edit Cosmetic thread in Solidworks?

Editing Cosmetic Threads

1. In a part or assembly document, right-click the Cosmetic Thread feature and click Edit Feature .
2. Make the necessary changes in the Cosmetic Thread PropertyManager, and click .

What is thread pitch on a bolt?

The thread pitch is the distance between threads expressed in millimetres (measured along the length of the fastener). For example a thread pitch of 1.5 means that the distance between one thread and the next is 1.5mm. In general smaller fasteners have finer thread so they have lower thread pitch.

How many types of threads are there?

Six Most Common Types of Threads



NPT/NPTF. BSPP (BSP, parallel) BSPT (BSP, tapered) metric parallel.

What are thread notes used for?

Thread notes provide information about the standard hole features in the model. You can choose whether to create the thread note or not, when you create or edit the definition of a standard hole.

What is a thread note?

Thread notes provide information about standard hole features in your design, including the values listed in the hole chart for that hole.