How do you add a force in Solidworks?

How do I add a force to a motion study in SolidWorks?

From an assembly, click Force (MotionManager toolbar). You must add in SOLIDWORKS Motion before adding a force to a motion study.

…

Force Function.

How do you show forces in SolidWorks?

To list reaction forces, after running the analysis, right-click Results and select List Result Force. In the PropertyManager, under Options select Reaction force. You can also click Results Advisor > List Result Force (Simulation CommandManager).

How do you add torque in SolidWorks?

Force/Torque PropertyManager

1. Click the down arrow. on External Loads (Simulation CommandManager) and select Force. .
2. In the Simulation study tree, right-click External Loads , and select Force. or Torque .

How do you simulate movements in SolidWorks?

To start a motion study in SOLIDWORKS you can click on “Motion Study 1” tab on the lower left corner of SOLIDWORKS user interface. Make sure to click on “Expand Motion Manager” to display the SOLIDWORKS Motion Manager timeline view. The first thing you need to do is to select the type of simulation you want to perform.

How do I add a motor in SolidWorks?

To use a motor in a motion study:

1. Create or edit the motion study.
2. Click Motor (MotionManager toolbar).
3. Edit the properties in the Motor PropertyManager.

What is free body force in SolidWorks?

The free body forces can come from contact, external loads, restraints, or connectors. List Free Body Forces is available for static and nonlinear studies. For a static study, on the Static > Options tab, select Compute free body forces.

What are reaction forces?

A reaction force is a force that acts in the opposite direction to an action force. Friction is the reaction force resulting from surface interaction and adhesion during sliding. Reaction forces and reaction moment are usually the result of the actions of applied forces.

When should a spring connector be used?

You define a spring connector when you want to model actual springs in your simulation, for example, shock absorbers in an automotive suspension. Without spring connectors, you must model the actual geometry of the spring, mesh it, and impose necessary contact conditions.

How do I apply a load in SolidWorks?

How to Use Load Cases in SOLIDWORKS Simulation

1. Step 1: The Plan. …
2. Step 2: Open the File. …
3. Step 3: Create a New Static Study. …
4. Step 4: Apply the Material as Aluminum 1060 Alloy. …
5. Step 5: Apply Fixtures. …
6. Step 6: Apply Loads. …
7. Step 7: Mesh the Model. …
8. Step 8: Open Up the Load Case Manager.

How do you insert a line break in SolidWorks?

To create a projection split line:

1. Click Split Line. (Curves toolbar) or Insert > Curve > Split Line.
2. In the PropertyManager, under Type of Split, select Projection.
3. Under Selections, click: A sketch for Sketch to Project. . You can select multiple contours from the same sketch to split. …
4. Click . Before. After.