How do I use the sweep tool in Solidworks?

What does the sweep tool do in Solidworks?

A frequently asked question amongst clients is, “What is a sweep?” Within SOLIDWORKS, a sweep is a tool that creates a solid, a cut or a surface feature by moving a profile along a path. To create a solid, use the Swept Boss tool to move a profile along a path. The profile can contain one or more closed contours.

How do I use surface sweep in Solidworks?

Click Swept Surface (Surfaces toolbar) or Insert > Surface > Sweep. Set the PropertyManager options. Click OK .

How do you sweep along a path?

Create a Sweep Along a Path

1. Sketch a profile and path on intersecting planes. …
2. Click 3D Model tab Create panel Sweep . …
3. In the Sweep dialog box, click Profile and then select the profile to sweep. …
4. With the Path selection tool, select a 2D sketch, 3D sketch, or edges of geometry.

What is Sweep feature?

Sweep features are defined by using custom 2D cross-section (or face) moved along a pre-set path to create a 3D shape or surface. With the sweep method, the user defines a 2-D or 3-D guide curve, in addition to creating the cross-section.

How do you sweep in Assembly in SolidWorks?

Click Assembly Features (Assembly tab on the CommandManager) and click Swept Cut , or click Insert > Assembly Feature > Cut > Sweep . Set options as needed in the Swept Cut PropertyManager. Under Feature Scope, specify which components you want the feature to affect.

How do you surface sweep?

If you are using guide curves, create coincident or pierce relations between the guide curves and the profile. Click Swept Surface (Surfaces toolbar) or Insert > Surface > Sweep. Set the PropertyManager options. Click OK .

…

Swept Surface.

Where is sweep in Solidworks?

Use a sketch, existing model edges, or curves. Click one of the following: Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep. Swept Cut on the Features toolbar or Insert > Cut > Sweep.

What are the two necessary elements to create a sweep solidworks?

To create a sweep:

• Sketch a closed, non-intersecting profile on a plane or a face. If you use guide curves: …
• Create the path for the profile to follow. Use a sketch, existing model edges, or curves. …
• Click one of the following: …
• In the PropertyManager: …
• Set the other PropertyManager options.
• Click OK .

What are the two necessary elements to create a sweep?

Two elements are required to create a sweep surface: Trajectory—Curve or curves that guide the sweep. Cross-sectional sweep profile—Curve or curves that sweep along the trajectory. ◦ One or two trajectories can be used.