How do I use the core command in Solidworks?

How do you make a mold core in SolidWorks?

on the Mold Tools toolbar, or click Insert > Molds > Core. A new body is created for the core and is subtracted from the Cavity Body.

How do I extract files in SolidWorks?

To extract auxiliary sketches:

1. While editing a sketch, select the sketch entities that make up the auxiliary view.
2. Hold Ctrl and select a line in another view to specify the angle of the auxiliary view.
3. Click Auxiliary Sketch (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Auxiliary.

How do you make a cavity part in SolidWorks?

Click Cavity on the Mold Tools toolbar, or click Insert > Mold > Cavity. In the PropertyManager, under Design Components, select the design parts from the FeatureManager design tree.

How do I isolate a surface in Solidworks?

To isolate components: Select the components you want to isolate in the graphics area or the FeatureManager design tree. Click View > Display > Isolate or right-click and select Isolate. To isolate components that share a mate, right-click the mate in the FeatureManager design tree and click Isolate.

How do I extract part from a Solidworks assembly?

Assemblies Saved as Parts Export Options

1. Click Tools > Options > System Options > Export.
2. For File Format, select SLDPRT from assembly.
3. Specify the following options, and click OK.

How do I export a surface in Solidworks?

To export a SOLIDWORKS document as another file type:

1. Select one of the following: The face or surface of a part in the graphics area. …
2. Click File > Save As.
3. Set Save as type to a file type, then click Options.
4. Set options for the file type. …
5. In the File name box, type a name. …
6. Click Save.

How do you use cavity command in Solidworks?

To create a cavity in the mold base:

1. Optional: Insert the design parts and the mold base into an interim assembly.
2. In the assembly window, select the mold base, and click Edit Component on the Assembly toolbar. …
3. Click Cavity on the Mold Tools toolbar, or click Insert > Mold > Cavity.

How do you fill an object in Solidworks?

To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK . Set the PropertyManager options based on the type of filled surface you want to create.

What is solidworks flow simulation?

SOLIDWORKS® Flow Simulation is an intuitive Computational Fluid Dynamics (CFD) solution embedded within SOLIDWORKS 3D CAD that enables you to quickly and easily simulate liquid and gas flows through and around your designs to calculate product performance and capabilities.