How do I use multiple sections in Catia?

Why is multi section Command used?

Although a single command, it has a lot of options in it called as – Coupling modes, which at times perplexes the user when and how to use which one. It can be used when a solid has to be generated and has multiple varying sections.

How do I remove multi section solid in Catia?

Creating Removed Multi-sections Solids

1. Select Closing Point 2 as shown on Section 2 to redefine the closing point.
2. Click Closing Point 2 arrow to reverse the direction. It is possible to edit the feature reference elements by first selecting a curve in the dialog box list then choosing a button to either:

How do I merge in Catia?

Creating Combined Curves

1. Click Combine . …
2. Choose the combine type: normal or along directions. …
3. Successively select the two curves to be combined. …
4. Click OK to create the element. …
5. Successively select the two curves to be combined and a direction for each curve. …
6. Click OK to create the element.

How do you split an object in Catia?

CATPart document.

1. Click Split . The Split Definition dialog box is displayed.
2. Select Surface. 1 as the splitting surface. This surface intersects only one pad. …
3. Click OK . Material has been removed, but only one pad is split. The other one is unchanged because the surface did not intersect it.

How do you make rib Catia?

CATPart document.

1. Click Rib . The Rib Definition dialog box is displayed.
2. Select the profile you wish to sweep, i.e. Sketch . 2 . …
3. Select the center curve, i.e. Sketch. 1 . …
4. To go on with our scenario, maintain Keep angle. …
5. Click OK .

How do I convert assembly to part in Catia?

How to convert an assembly into one solid model (single body) IN…

1. Open your assembly.
2. tools> create part from assembly.
3. Click on the assembly you want to convert in the part tree.
4. Click on OK.
5. Save the new part.

How do I connect two lines in Catia?

CATPart document.

1. Click Join . …
2. Select the surfaces or curves to be joined.
3. You can edit the list of elements to be joined: …
4. Right-click the elements from the list and choose the Check Selection contextual command. …
5. Click Preview . …
6. Click Cancel to return to the Join Definition dialog box.

What is solid combine in Catia?

The Solid Combine capability computes the intersection between the profiles virtually extruded. By default, each component is extruded in a plane normal to its sketch plane. The application previews the result as soon as the second component has been selected.

What is split and trim in Catia?

The main difference between these two commands is that Split is only cutting specific surfaces while Trim will cut all surfaces involved in the operation.

Is it possible to split using the sew operation?

30) Is it possible to split using the SEW operation? Yes.