How do I use mates in Solidworks?

How do you use slot mate in SOLIDWORKS?

Slot Mates

  1. Click Mate (Assembly toolbar) or Insert > Mate.
  2. In the PropertyManager, expand Mechanical Mates and select Slot .
  3. For Mate Selections, select a slot face and the feature to mate to it: The face of another straight or angular slot. An axis. …
  4. Select a constraint option: Option. Description. …
  5. Click .

How do you view mates in SolidWorks?

Hold down Ctrl, click the components, and then right-click. Right-click the subassembly in the FeatureManager design tree. Click View Mates . The View Mates window appears.

What standard mates are used in SolidWorks?

Standard mates include angle, coincident, concentric, distance, lock, parallel, perpendicular, and tangent mates. You can add an angle mate between the combinations shown below.

How do you use the pin slot mate?

StepsCopy link

  1. Tap .
  2. Confirm that Pin slot is selected in the Mate type field.
  3. Select two Mate connectors (inferred or existing) to use.
  4. Optionally, tap Offset to provide an offset distance.
  5. Optionally, tap Limits to set distance limits for movement.
  6. Optionally, tap. …
  7. Optionally, tap. …
  8. Tap checkmark.
IT IS INTERESTING:  How do you rotate models in Ansys Workbench?

How do you make a slot in Solidworks?

Creating a Straight Slot

  1. In a sketch, click Straight Slot (Sketch toolbar) or Tools > Sketch Entities > Straight Slot .
  2. Click to specify the starting point of the slot.
  3. Move the pointer and then click to specify the length of the slot.
  4. Move the pointer and then click to specify the width of the slot.

Do assemblies have reference planes?

Reference planes exist in the Part, Sheet Metal and Assembly environments. You can use both part and assembly reference planes to position parts in an assembly. To make the assembly display more cleanly, reference planes for parts and subassemblies are displayed only when you place and edit them.

Do assemblies have reference planes in Onshape?

@james_close We do not allow planes in the Assembly however you can use mate connectors which can be added to the assembly origin. Hi, Thanks for the comment. You allow Parts, Sketches and Surfaces defined in a Part Studio to be Inserted to an Assembly.

Which mate allows the most degrees of freedom?

In Onshape there is just one Mate between any two parts, and therefore the movement (degrees of freedom) between those two parts embedded within the Mate.



Mates in Onshape & their Types [2020]

Degrees of Freedom Mate Types
Three Degrees of Freedom Planar Mate Ball Mate
Four Degree of Freedom Parallel Mate

How do I email a SOLIDWORKS assembly?

Mailing an Assembly or Drawing to Another Computer

  1. Click File > Send To.
  2. In the dialog box, select one of the following: Name of the current document only. …
  3. Click OK.
  4. Type your mail password, the mailing address, and any other information required by your mail application.
IT IS INTERESTING:  How do I mask an image in AutoCAD?

How can you create relationships between parts within an assembly?

To create a part within an assembly:

  1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
  2. For externally saved parts, type a name for the new part in the Save As dialog box and click Save.
  3. Select a plane or planar face (while the pointer is ).

How do I get my SOLIDWORKS toolbar back?

To display SOLIDWORKS toolbars:

  1. Right-click in the window border and select or clear a toolbar name.
  2. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.
Special Project