How do I turn off draft analysis in Solidworks?

Where is draft analysis solidworks?

To perform an analysis:

• Click Draft Analysis (Mold Tools toolbar) or View > Display > Draft Analysis. Set analysis parameters and color settings, and then click .
• Click View > Modify > Draft Analysis.
• Click Draft Analysis (View toolbar) or View > Display > Draft Analysis.

How do you delete a draft in Solidworks?

Set a value for Draft Angle and click Change to modify the draft for the selected faces. In this example, change the draft to 10deg . Under Draft Analysis, select Auto paint to see what other faces need draft. To remove draft from faces, you would click Remove.

What is a draft angle in Solidworks?

Draft tapers faces using a specified angle to selected faces in the model. One application is to make a molded part easier to remove from the mold. You can insert a draft in an existing part or draft while extruding a feature.

What is the use of draft analysis?

The Draft Analysis command enables you to detect if the part you drafted will be easily removed. This type of analysis is performed based on color ranges identifying zones on the analyzed element where the deviation from the draft direction at any point, corresponds to specified values.

What is draft in injection molding?

A draft angle is calculated as a degree measurement (or, less often, an inch or millimeter measurement) from the vertical axis of a mold, and it helps account for thermoplastic shrinkage, a practical reality of the injection molding process for most materials.

How do you delete a material in Solidworks?

To remove a material from a part: In a part document, right-click Material in the FeatureManager design tree and select Remove Material. Search ‘Removing a Material’ in the SOLIDWORKS Knowledge Base.

What is neutral plane in draft?

You can create a feature that tapers selected model faces by a specified angle, using a Neutral Plane to determine the direction of pull for creating molds. You can also use the DraftXpert to create, change, or remove neutral plane drafts.

What is step draft?

A step draft is a variation of a parting line draft. The step draft creates one face rotated about the plane used as the Direction of Pull. This results in small faces, representing the steps (highlighted in blue in the example below).

How do you dimension a draft?

There are several ways to invoke the command:

1. Press the. Draft Dimension button.
2. Select the Annotation → Dimension option from the menu.
3. Use the keyboard shortcut: D then I.

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

How is draft angle measured?

You can measure the draft angle of positions within a surface patch by holding down the Shift key. The draft angle is measured from the principle plane to the normal of the point on the surface under the cursor. Click the position on the surface to enter the draft angle into the expressions box.

How do you extrude outwards in Solidworks?

Extrude PropertyManager

1. Create a sketch.
2. Click one of the extrude tools: Extruded Boss/Base. on the Features toolbar, or click Insert > Boss/Base > Extrude. Extruded Cut. on the Features toolbar, or click Insert > Cut > Extrude. Extruded Surface. on the Surfaces toolbar, or click Insert > Surface > Extrude.

How do you use wrap command in Solidworks?

Wrap

1. Select the sketch you want to wrap from the FeatureManager design tree. …
2. Click Wrap on the Features toolbar, or click Insert > Features > Wrap.
3. In the PropertyManager, under Wrap Type: …
4. If you select Emboss or Deboss , you can select a line, linear edge, or plane to set a Pull Direction . …
5. Click OK .

How do you use the fillet tool in Solidworks?

To create fillets:

1. Click Fillet on the Features toolbar, or click Insert, Features, Fillet/Round.
2. Set the PropertyManager options. For constant radius fillets only, you can use the FilletXpert to add or modify fillets and to manage fillet corners.
3. Click OK .