How do I rebuild solidworks?

Where is the rebuild tool in Solidworks?

The Rebuild toolbar buttons are located on the Standard toolbar. You can add the tools to the CommandManager, shortcut bars, and mouse gestures.

How do you auto rebuild in Solidworks?

To defer the update of assemblies: Right-click the assembly name at the top of the FeatureManager design tree, and select Suspend Automatic Rebuild. (Rebuild Suspended) appears in the status bar. To manually update when in Suspend Automatic Rebuild mode, click Rebuild on the Standard toolbar.

How do I fix a solidworks rebuild error?

To control the rebuild action:

1. Click Options (Standard toolbar) or Tools, Options.
2. Select Stop, Continue, or Prompt for When rebuild error occurs, then click OK.

How do I rebuild all configurations in Solidworks?

Rebuilding All Configurations

1. In the ConfigurationManager, right-click the file name and click Rebuild All Configurations.
2. In a file, click Edit > Rebuild All Configurations.
3. Press Ctrl + Shift + B.

How do I repair a sketch in Solidworks?

To open the Repair Sketch tool: Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch. Repair Sketch merges these into a single entity.

How do I stop a solidworks rebuild?

Click Tools > Options > System Options > Assemblies and under When Large Assembly Mode is active, select Suspend automatic rebuild.

How do I find a circular reference in Solidworks?

In your assembly, simply go to your Command Manager, click on the Evaluate tab, then the Performance Evaluation. Alternately, you could use the dropdown menu and go to Tools > Evaluate > Performance Evaluation.

What does Ctrl Q Do in Solidworks?

Ctrl+Q is a full or force rebuild. This rebuilds all features starting at the top of the feature tree and working down. Rebuilding everything in history order allows everything to work out how they should look and to do so before any features that rely on them do the same thing.

What does Cannot locate end of feature solidworks?

You may get an error which says “Cannot locate end of the feature.” This results because the extrude direction is incorrect. If that’s the case, click the “switch direction” button next to the end condition menu (it looks like two parallel, opposing arrows) and Solidworks will reverse the extrusion direction.

How do I turn on the freeze bar in Solidworks?

To turn on the freeze bar, click Tools > Options > System Options > General and select Enable Freeze bar. To freeze features: Move the pointer over the freeze bar.

How do I update Solidworks configuration?

If you click No and then later want to rebuild all configurations, you can right-click the freeze bar and click Update All Configurations. Search ‘Update All Configurations Dialog Box’ in the SOLIDWORKS Knowledge Base.