How do I project a plane in Catia?

How do I project in Catia?

CATPart document.

1. Click Projection . …
2. Select the element to be Projected . …
3. Select the Support element.
4. Use the combo to specify the direction type for the projection: …
5. Whenever several projections are possible, the nearest projection can be kept by checking Nearest Solution . …
6. Click OK to create the projection element.

How do I project a Sketch onto a plane?

Use this selection to project a sketched curve onto a model face.

1. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.
2. Under Direction of Projection , select a plane, edge, sketch, or face as the direction of the projected curve.

How do I project a surface in Catia V5?

This task explains how to project a curve on a surface. Open the ProjectCurves. CATPart document. Click the Curve Projection icon .

…

The ‘Curve Projection’ dialog box opens.

1. Select the curve as ‘Element’.
2. F8 to move to the next selection field.
3. Select the surface as ‘Support’.

How do you draw a plane in Catia V5?

CREATING AN AEROPLANE in CATIA

1. Step 1: Open CATIA. Open CATIA V5. …
2. Step 2: CREATE PLANES. …
3. Step 3: MULTI SECTIONS SURFACE. …
4. Step 4: CREATING FRONT SECTION OF THE PLANE. …
5. Step 5: CREATING WINGS. …
6. Step 6: CREATING WINDOWS AND DOORS. …
7. Step 7: CREATING VERTICAL STABILIZER. …
8. Step 8: CREATING RUDDER.

How do I project 3D elements in Catia?

Projecting 3D Elements onto the View Plane

1. Double-click the left view to activate it.
2. Click Project 3D Elements in the 3D Geometry toolbar or select Insert > 3D Geometry Use Edges > Project 3D Elements from the menu bar.
3. Select the element to be projected.

What is the full form of Catia?

CATIA (Computer-Aided Three dimensional Interactive Application) software is a complete multi-platform solution for computer-aided design, manufacturing, engineering, 3D and PLM.

How do you project a Sketch in Fusion 360?

Project geometry onto a sketch plane

1. On the Sketch contextual tab, select Create > Project/Include > Project . …
2. In the dialog, select a Selection Filter: …
3. In the canvas, select the bodies, faces, edges, or points to project.

How do I convert entities in Solidworks?

To convert an entity:

1. In an open sketch, click a model edge, loop, face, curve, external sketch contour, set of edges, or set of curves. You can also click an entity after clicking the Convert Entities. …
2. Click Convert Entities. …
3. In the PropertyManager, click Select chain to convert all contiguous sketch entities. …
4. Click .

How do you make a surface in Catia?

Creating Fill Surfaces

1. Click Fill in the Surfaces toolbar. …
2. Select curves or surface edges to form a closed boundary. …
3. Select the Continuity type to specify it between any selected support surfaces and the fill surface.

How do you draw on surface Catia?

3 Answers

1. sketch the side profile of the buttons in a plane parallel to the front of the controller. if the buttons are mirror image of each other, just sketch one button.
2. pad the sketch to define the button width.
3. add fillets to round off the button ends.
4. mirror the pad and fillets to make the second button.

Where is the plane button in Catia?

Select the Tools -> Multi View -> View Plane Definition command from the menu bar. The Plane Definition dialog box appears. 3. Enter the desired options from the dialog box ( Isometric ).

How do I get the reference element toolbar in Catia?

You can display the Reference Elements toolbar using View > Toolbars > Reference Elements (extended/compact) . Create Points: Click this icon, choose the creation method then define the required parameters.