How do I cut a view in Catia?

How do I cut a section in Catia?

Creating 3D Section Cuts

1. Select Insert > Sectioning from the menu bar, or click Sectioning in the DMU Space Analysis toolbar and create a section plane. …
2. In the Definition tab, click Volume Cut to obtain a section cut:

How do I cut models in Catia?

For this:

1. Select Tools > Options from the menu bar. The Options dialog box is displayed.
2. Expand the Digital Mockup category from the left-hand tree.
3. Select DMU Optimizer item to display the corresponding tab. …
4. Select the 3D Cut option: it is automatically activated as an alternate shape.

How do I cut in Catia v5?

Cutting the Part by the Sketch Plane

1. Double-click Sketch. 2 from the geometry. …
2. Move the sketch so that you can see the whole part.
3. Click Cut Part by Sketch Plane from the Visualization toolbar.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

What is master section in Catia?

Master sections are the guides for design requirements which decide the component packaging after technical (Styling, Concept or Class-A) surfaces.

How do you make stiffener in Catia v5?

This task shows you how to create a stiffener by specifying creation directions. Open the Stiffener. CATPart document. Select the profile to be extruded, that is Sketch.

…

1. Click Stiffener . …
2. Uncheck the Neutral Fiber option. …
3. Check the Neutral Fiber option again. …
4. Enter 12 as the thickness value. …
5. Click OK .

How do I use dynamic sectioning in Catia?

To create a section plane, you need to click Dynamic Sectioning in the Dynamic Sectioning toolbar. The section plane is automatically displayed. The center of the plane is located at the origin of the local axis system relative to the part. A section plane has limits and its own local axis system.

How do you cut part of half in Catia?

CATPart document.

1. Click Split . The Split Definition dialog box appears.
2. Select the element to be split. You should make your selection by clicking on the portion that you want to keep after the split. …
3. Select the cutting element. A preview of the split appears. …
4. Click OK to split the element.

What is split and trim in Catia?

The main difference between these two commands is that Split is only cutting specific surfaces while Trim will cut all surfaces involved in the operation.