How do I create a slot in Catia v5?

What is rib command in Catia?

This task shows you how to create a rib, that is how to sweep a profile along a center curve to create material. To define a rib, you need a center curve, a planar profile and possibly a reference element or a pulling direction. To create ribs you can combine the different elements as follows: Open profile.

How do I create a point in Catia v5?

On plane

1. Click Point . …
2. Select the On plane point type.
3. Select a plane. …
4. You can select a point to define a reference for computing coordinates in the plane. …
5. Optionally, select a surface on which the point is projected normally to the plane. …
6. Click in the plane to display a point.
7. Click OK to create the point.

Can you create a pad using Open profile?

The application allows you to create pads from open profiles provided existing geometry can trim the pads.

How do you make ribs in Catia v5?

CATPart document.

1. Click Rib . The Rib Definition dialog box is displayed.
2. Select the profile you wish to sweep, i.e. Sketch . 2 . …
3. Select the center curve, i.e. Sketch. 1 . …
4. To go on with our scenario, maintain Keep angle. …
5. Click OK .

How do you make a shaft in Catia?

Open the Revolution. CATPart document and make sure that PartBody is set as current. Select Sketch.

…

An open profile (not even closed by the revolution axis) cannot be be used as the first feature in a body.

1. Click Shaft . …
2. Click OK to close the warning message and display the Shaft Definition dialog box.

How do you make stiffener in Catia v5?

This task shows you how to create a stiffener by specifying creation directions. Open the Stiffener. CATPart document. Select the profile to be extruded, that is Sketch.

…

1. Click Stiffener . …
2. Uncheck the Neutral Fiber option. …
3. Check the Neutral Fiber option again. …
4. Enter 12 as the thickness value. …
5. Click OK .

How do you create a point?

To Create Points at Specified Coordinates

1. Select settings and create styles, layers, point groups, and description keys.
2. Click Home tab Create Ground Data panel Points Menu Create Points – Miscellaneous Manual . …
3. Specify the location for the point in the drawing.

How do you design a part?

Lesson 1 of 6 – How to Design a Part

1. Draw basic 2D shapes, the foundation for 3D shapes.
2. Set sizes numerically.
3. Navigate your drawing.
4. Keep shapes closed.
5. Draw text.
6. Select lines.
7. Leverage snap points.
8. Divide lines where they cross.

What is part Modelling in CATIA?

With the CATIA part design application, users can transform rough sketches into extremely accurate 3D mechanical parts. This software offers a variety of efficient design features, which in turn allows us to tackle a range of projects.

Where is sketch based features in CATIA?

Sketch-Based Features Toolbar



To choose your display mode, use the View -> Toolbars -> Sketch-Based Feature (Extended/Compact) command.