How do I create a cross section in Catia?

How do I create a section in Catia v5?

Creating 3D Section Cuts

  1. Select Insert > Sectioning from the menu bar, or click Sectioning in the DMU Space Analysis toolbar and create a section plane. …
  2. In the Definition tab, click Volume Cut to obtain a section cut:

How do you cut parts in Catia?

Cutting the Part by the Sketch Plane

  1. Double-click Sketch. 2 from the geometry. …
  2. Move the sketch so that you can see the whole part.
  3. Click Cut Part by Sketch Plane from the Visualization toolbar.

How do I create a section view?

To create a section view manually:

  1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
  2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
  3. Sketch a section line. …
  4. Click to place the view.

How do I use dynamic sectioning in Catia?

To create a section plane, you need to click Dynamic Sectioning in the Dynamic Sectioning toolbar. The section plane is automatically displayed. The center of the plane is located at the origin of the local axis system relative to the part. A section plane has limits and its own local axis system.

IT IS INTERESTING:  Is Revit an Autodesk product?

How do you flip section view in Catia?

Click to define the section view direction and to position the view on the sheet. Even when the view is generated, you can edit and modify the section profile. To do this, double-click this profile and either invert or replace it.

Which view type shows a cross section of the model?

A revolved view is a cross section of an existing view, revolved 90 degrees around a cutting plane projection. You can use a cross section created in the 3D model as the cutting plane, or you can create one on the fly while placing the view.

How do you get section view on Onshape?

Click the section view icon in the dialog.



To crop a view, sketch a spline around the area you wish to keep.

  1. Click .
  2. Use the Spline tool to define a closed profile for the view. …
  3. Click .

How do I cut an assembly in CATIA?

Reusing Assembly Design Splits



In this case, you just need to select the existing assembly split, click the Assembly Split icon and then select a face. Only the Assembly Features Definition dialog box appears to let you determine the parts of interest.

What is the difference between split and trim in CATIA?

Split versus Trim



The main difference between these two commands is that Split is only cutting specific surfaces while Trim will cut all surfaces involved in the operation.

What is split in CATIA?

Split: Split in CATIA is used to cut off one element with another element. When we use split it is possible to cut off a line or a curve with a point, a curve or a surface. Splitting a surface, with a curve, line or surface.

IT IS INTERESTING:  What version of CATIA does Boeing use?

How do you create a section in CAD?

To Create a Full Section View

  1. Click Layout tab Create View panel Section drop-down Full. …
  2. Click the view you want to use as the parent view. …
  3. Click in the drawing area to indicate the start point of the section line. …
  4. Click in the drawing area to indicate the end point of the section line.

How do you make a 3D section?

How to Create 3D Sections in Revit

  1. Open your project in the default 3D view.
  2. Right click on the view cube.
  3. Find “Orient to View” in the menu and mouse over it.
  4. When it expands it will give you the following options: …
  5. Mouse over one of these and you will find any views you have created of this type.

How do you draw a section line?

To Draw a Section Line and Marks

  1. On the default tool palette set, click the Design tab, and then click the Vertical Section tool. …
  2. Specify the start point of the section line.
  3. Continue to specify points to define the section line, if needed. …
  4. Specify the endpoint of the section line, and press Enter.
Special Project