Frequent question: Which view is a floor plan?

A floor plan is not a top view or birds eye view. It is a measured drawing to scale of the layout of a floor in a building. A top view or bird’s eye view does not show an orthogonally projected plane cut at the typical four foot height above the floor level.

What type of view is a floor plan?

A floor plan is a 2D graph drawing that shows the basic layout of a property in scale from an aerial view. The drawing shows the relationship between rooms and how people will move through them.

Is plan front view or top view?

A plan view is an orthographic projection of a 3-dimensional object from the position of a horizontal plane through the object. In other words, a plan is a section viewed from the top.

What is a plan view?

: the appearance of an object as seen from above.

Is a floor plan horizontal?

A floor plan represents a horizontal section cut through a building at a certain elevation above grade, usually about 4 feet. It is an orthographic projection, that is, viewed straight up from the ground.

IT IS INTERESTING:  How do I show the Start tab in AutoCAD?

What is the difference between floor plan and ceiling plan?

In a floor plan, the imagined viewer is somewhere between the floor and ceiling of a room and looking down (approximately 1200mm / 4ft above). In a reflected ceiling plan, the imagined viewer is above the ceiling and looking through it into a mirrored surface below.

What scale is commonly used for residential floor plans?

building plans are drawn to scale. scales used on building plans include 1:100, 1:200 and 1:500. scales on building plans allow you to work out the actual lengths.

What do you call the front view of a house?

The front part of a property or building that faces the street. frontispiece. facade. façade.

What is an end view?

A focus on the end goal or desired outcome. Although working on my thesis was overwhelming, I tried to keep the end in view and envisioned holding my degree. I don’t take these personnel decisions lightly—they are all made with the end in view.

What is Section plan?

Plan drawings are in fact a type of section, but they cut through the building on a horizontal rather than vertical plane. … The direction of the plane through which the section is cut is often represented on plan drawings and elevations by a line of long and short dashes, called a section plane.

What’s the difference between floor plans and site plans?

What’s the difference between a site plan and a floor plan? A site plan is different from a floor plan, in that a site plan is a comprehensive view from above of the entire property, while a floor plan shows a building footprint: the interior walls and features.

IT IS INTERESTING:  What is the purpose of mirror in AutoCAD?

How high are floor plans cut above the floor?

The imaginary line or slice on a floor plan drawing showing where a building is “cut”, typically about 4 feet above the floor. Everything below the cutting plan appears in the floor plan.

Who uses floor plans?

In general, it is a drawing with scale sizes that feature the placing of rooms, fittings, and furniture observed from above. Architects and designers usually use floor plans to turn ideas into visuals and get a clear understanding of what will come out in the end.

Special Project