Frequent question: What is sweep command in Catia?

How do you do a sweep in Catia?

With pulling direction

1. Click Sweep . …
2. Click the Explicit profile icon and select With pulling direction from the Subtype drop-down list.
3. Select the Profile to be swept out (DemoProfile2).
4. Select a first Guide curve (DemoGuide1).
5. Select a Direction (zx plane).
6. Optionally, you can impose an Angle .

Which command is usually known as sweep in Catia?

RIB command

This command which is usually known as SWEEP is called RIB IN CATIA. It adds material along a guide curve. RIB is used to make components like springs, pipes etc.

What is sweep in design?

Sweep features are defined by using custom 2D cross-section (or face) moved along a pre-set path to create a 3D shape or surface. With the sweep method, the user defines a 2-D or 3-D guide curve, in addition to creating the cross-section.

How many sweep options are there in Catia V5?

There are total 21 types of sweep surface commands in CATIA V5 mainly.

What is sweep surface?

Sweep Surfaces are surfaces that are generated from a section curve positioned along a path. Various Sweep types are available to extend the sweep definition as follows: Sweep by Two Guide Curves is defined as moving and adjusting a section curve along two guide curves.

What is surfacing in Catia?

CATIA Surfacing (Generative Shape Design) training course

CATIA’s Generative Shape Design Workbench contains surfacing tools for creating geometry that is otherwise impossible to make with standard part design tools, such as pads, revolves, sweeps, and multi-section solids.

What are the commands of CATIA?

Let’s see how each of these command are used.

• PAD command.
• POCKET command.
• SHAFT command.
• GROOVE command.
• RIB command.
• SLOT command.

What is pocket in CATIA?

Creating a pocket consists in extruding a profile or a surface and removing the material resulting from the extrusion. The application lets you choose the limits of creation as well as the direction of extrusion. The limits you can use are the same as those available for creating pads.

What is the use of shaft in CATIA?

You can create shafts from sketches including several closed profiles. These profiles must not intersect and they must be on the same side of the axis. Moreover, you can define whether you need the whole sketch, or sub-elements only. For more information, refer to Using the Sub-elements of a Sketch.

What is sweep in Creo?

When you create a sweep, you can create a solid or surface feature. Add or remove material while sweeping a section along one or more selected trajectories by controlling the section’s orientation, rotation and geometry.

What is swept surface in Solidworks?

To create a swept surface: Create planes for sketching the sweep profile, sweep path, and if necessary, the guide curves. Sketch the sweep profile and path on the planes that you created. You can also sketch the sweep path on a model face or use a model edge for the path.

How do you use multi section solid in Catia?

Click Multi-sections Solid . The Multi-sections Solid Definition dialog box appears. Select the three section curves as shown: They are highlighted in the geometry area.
…
Guides

1. Remove the selected curve.
2. Replace the selected curve by another curve.
3. Add another curve.