Frequent question: How do I add a fillet in Solidworks?

Why can’t I create a fillet in SolidWorks?

You get this error because you have two perpendicular lines, and the sketch fillet radius you try to apply is equal to the length of one of the lines. It means that it should delete one of the lines and this way replace two lines with a line and an arc. Sketch fillet simply cannot do that.

What is fillet command in SolidWorks?

Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops.

How do you fillet a 3D object in SolidWorks?

To fillet multiple edges of a 3D solid using the Chain option:

1. Click Solids > Solid Editing > Fillet edges (or type FilletEdges).
2. Specify the Radius option.
3. Specify the radius of the fillet arc.
4. Specify the Chain option.
5. Specify an edge tangent to an existing fillet on a 3D solid. …
6. Press Enter.

How do you specify a fillet on a drawing?

Double-click the drawing background to display the General arrangement drawing properties dialog box. Click Part or Pour object. If you need to change part representation for profiles, select Exact from the Part representation list. Under Additional marks, select the Fillet edges on/off check box.

Can you fillet a sketch in Solidworks?

on the Sketch toolbar, or Tools > Sketch Tools > Fillet. Set the properties in the Sketch Fillet PropertyManager. Select the sketch entities to fillet. You can select non-intersecting entities.

How do you fillet a circle in Solidworks?

Select the edge, and go to Insert > Features > and select Fillet/Round. In the property manager under Fillet Type, click Constant Size Fillet. Next, under Items to Fillet, select both Tangent Propagation and Full Preview. Under Fillet Parameters, select Symmetric in the drop down list and then set the radius to 40 mm.

How do you use the shell tool in Solidworks?

The Solidworks shell tool is located in both features commandmanager and Insert menubar.

…

How to Use Solidworks Shell Tool

1. Step 1: Create New Part File. Open Solidworks CAD software and create new part file. …
2. Step 2: Create Rectangle Box. …
3. Step 3: Select SolidWorks Shell Tool. …
4. Step 4: Apply Solidworks Shell Tool.

Which is not fillet type in Solidworks?

constant size variable size face angled.

How do you fillet only part of an edge in Solidworks?

Creating Partial Chamfers and Fillets

1. Under Chamfer Type, click Offset Face .
2. Select Full preview.
3. Select Partial Edge Parameters.
4. In Start condition, select Distance offset.
5. Set Offset distance from start point to 20 mm.
6. In End condition, select Distance offset.