Can you extrude an open sketch in Solidworks?

Can open sketch be extrude?

If you use an open sketch, the feature automatically changes to a surface feature. In an Extrude feature with the Add Taper check box selected, an open section is not allowed with the taper option.

Can you extrude a sketch in an assembly solidworks?

Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Extrude or Revolve PropertyManager.

Can you extrude a 3D sketch solidworks?

You can create extruded surfaces from models that include 2D or 3D faces and knit the extruded surfaces to surrounding features. Click Insert > Surface > Extrude.

Why can’t I extrude cut in Solidworks?

Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.

What is extruded boss in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

How do you sketch a part in assembly in Solidworks?

To create a layout:

1. Open a new assembly.
2. In the Begin Assembly PropertyManager, click Create Layout. A 3D sketch opens, and Layout appears in the FeatureManager design tree.
3. Create sketch entities and group related entities into blocks.
4. Close the blocks and the sketch.

How do you make a part in sketch in assembly in Solidworks?

Creating a Part in an Assembly

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. Enter a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ). …
4. Construct the part features, using the same techniques you use to build a part on its own.

How do you extrude a point in Solidworks?

To extrude a feature:

1. Edit a sketch.
2. Select the sketch entities required for the feature. …
3. Hold Ctrl and select a point (in any sketch) to be the starting point for the extrusion.

How do you extrude a base in Solidworks?

Extrude PropertyManager

1. Create a sketch.
2. Click one of the extrude tools: Extruded Boss/Base. on the Features toolbar, or click Insert > Boss/Base > Extrude. Extruded Cut. on the Features toolbar, or click Insert > Cut > Extrude. Extruded Surface. on the Surfaces toolbar, or click Insert > Surface > Extrude.

How do you cut a sketch in SOLIDWORKS?

To cut a feature:

1. Edit a sketch.
2. Select the sketch entities required for the feature. …
3. Hold Ctrl and select a face to be the starting point for the cut.
4. Click Cut (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Cut, and click in the graphics area to establish the direction of the cut.

How do you remove material extrude in SOLIDWORKS?

Select the end condition. Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces.

How do I dissolve a sketch text in SOLIDWORKS?

If you would prefer the Sketch text to not behave like a block, it can be broken down into its separate sketch entities by right clicking and choosing to “dissolve sketch text.” Dissolving the sketch text will no longer allow you to make changes to the text.