Best answer: How do you trim an object in SolidWorks?

How do you trim solid objects in Solidworks?

Surface Cut

1. Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. …
2. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.
3. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies.

How do you trim extruded objects in Solidworks?

To create an assembly feature cut:

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.

What does the trim tool do in Solidworks?

The power trim tool is a favorite among SOLIDWORKS users. It’s a handy tool to cut away, trim or sketch geometry quickly.

How do you cut intersecting parts in SolidWorks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do you trim tubes in SolidWorks?

To cut pipes or tubes that penetrate each other:

1. In the FeatureManager design tree, expand the route assembly .
2. Right-click Route. …
3. Right-click the point where the straight run and the branch intersect (the intersection of the 3D sketch segments), and select Penetrate.

How do you trim entities?

You can use Power trim to trim multiple, adjacent sketch entities by dragging the pointer across each sketch entity. You can use Power trim to extend sketch entities along their natural paths. Extends or trims two sketch entities until they intersect at a virtual corner.

How do you cut a 2D shape in Solidworks?

To cut a feature:

1. Edit a sketch.
2. Select the sketch entities required for the feature. …
3. Hold Ctrl and select a face to be the starting point for the cut.
4. Click Cut (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Cut, and click in the graphics area to establish the direction of the cut.

How do you loft surfaces in SolidWorks?

To create a lofted surface:

1. Create a plane for each profile section of the loft. The planes do not need to be parallel.
2. Sketch the section profiles on the planes. …
3. If necessary, create guide curves. …
4. Click Lofted Surface (Surfaces toolbar) or Insert > Surface > Loft.
5. Set the PropertyManager options. …
6. Click OK .