Your question: Where is reference line in Revit?

In the Family Editor, click Create tab Datum panel (Reference Line). Using the drawing tools, sketch the line. The line displays as a solitary solid line until selected or when highlighted during preselection. When selected or highlighted, the associated planes display according to the active view.

How do you make a reference line in Revit?

Use the Line tool or the Pick Line tool to draw a reference plane.

1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) …
2. To draw a line: On the Draw panel, click (Line). …
3. To pick an existing line: On the Draw panel, click (Pick Lines).

How do you show reference planes in Revit?

Reference planes display in each plan view that you create for a model. Use the Line tool or the Pick Line tool to draw a reference plane. Name each reference plane so you can assign it to be the current work plane. Hide a selected reference plane or all reference planes in a view.

What is reference plane in Revit?

Use the Reference Plane tool to draw reference planes to use as a guideline in your design. Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model.

What is reference line?

A reference line, also referred to as a base line, is a user-defined vertical or horizontal line in the graph. Use reference lines to compare, reference, or measure against the data values displayed in the graph. … Reference lines are available if the X or Y axis contains a metric.

How do I create a reference level in Revit family?

Add Levels

1. Open the section or elevation view to add levels to.
2. On the ribbon, click (Level). Architecture tab Datum panel (Level) …
3. Place the cursor in the drawing area and click. …
4. Draw level lines by moving the cursor horizontally. …
5. Click when the level line is the correct length.

Do reference planes print in Revit?

Reference planes, crop boundaries, and scope boxes are hidden for printing by default. … Click Print (Print Setup). In the Print Setup dialog, select Hide ref/work planes.

How do you move a reference plane in Revit?

Use this tool to select a new work plane that is parallel to the existing work plane.

1. Select a work plane-based element in a view.
2. Click Modify | <Element> tab Work Plane panel (Edit Work Plane). …
3. In the Work Plane dialog, select another work plane. …
4. If needed, reposition the element on the work plane.

What is the use of reference plane?

In celestial mechanics, the plane of reference (or reference plane) is the plane used to define orbital elements (positions). The two main orbital elements that are measured with respect to the plane of reference are the inclination and the longitude of the ascending node.

Where is Family Editor in Revit?

Select an instance of the family in the drawing area, and click Modify | <Element> tab Mode panel (Edit Family). Double-click an instance of the family in the drawing area. Note: The double-click editing behavior is determined by the setting for the Family element type in the Double-click Options.

What is the purpose of reference line?

Reference Lines allow you to place lines on the plot at specific locations to mark important values. You could use these to mark control limits or to indicate a trend line for a set of data.

Where do you place the reference line?

In British English, the reference line typically appears after the letterhead, above the date, and on the left margin. In American English, it is usually left-justified and placed at the bottom of the letter.