Your question: Where is project 3D elements in Catia?

How do I project in Catia?

CATPart document.

  1. Click Projection . …
  2. Select the element to be Projected . …
  3. Select the Support element.
  4. Use the combo to specify the direction type for the projection: …
  5. Whenever several projections are possible, the nearest projection can be kept by checking Nearest Solution . …
  6. Click OK to create the projection element.

How do I project edge in Catia?

Double-click the right view to activate it. Click the Project 3D Silhouette Edges icon in the 3D Geometry toolbar ( Use-edge sub-toolbar). In the 3D background of the section view, select the canonical surface to be projected. The silhouette edge is projected onto the right view plane.

How do you create isolate feature in 3D in Catia?

Select Insert > Operation > 3D Geometry > Isolate command from the menu bar or right-click Mark. x > Isolate . The elements are no longer linked to the initial geometry, which means that you can edit them the way you wish.

What is the full form of Catia?

CATIA (Computer-Aided Three dimensional Interactive Application) software is a complete multi-platform solution for computer-aided design, manufacturing, engineering, 3D and PLM.

IT IS INTERESTING:  Your question: How do you draw free Onshape?

How do we constrain a spline in Catia?

There are two ways of imposing tangency and curvature constraints:

  1. Explicit : select a line or plane to which the tangent on the spline is parallel at the selected point.
  2. From curve : select a curve to which the spline is tangent at the selected point.

How do you make a surface in Catia?

Creating Fill Surfaces

  1. Click Fill in the Surfaces toolbar. …
  2. Select curves or surface edges to form a closed boundary. …
  3. Select the Continuity type to specify it between any selected support surfaces and the fill surface.

How do I project sketch on surface in Catia?

This task explains how to project a curve on a surface. Open the ProjectCurves. CATPart document. Click the Curve Projection icon .



The ‘Curve Projection’ dialog box opens.

  1. Select the curve as ‘Element’.
  2. F8 to move to the next selection field.
  3. Select the surface as ‘Support’.

How do you draw on surface Catia?

3 Answers

  1. sketch the side profile of the buttons in a plane parallel to the front of the controller. if the buttons are mirror image of each other, just sketch one button.
  2. pad the sketch to define the button width.
  3. add fillets to round off the button ends.
  4. mirror the pad and fillets to make the second button.

What is an isolated element in Catia?

isolate removes the the history of geometrical element. you will see a “red sign” in the feature tree. “isolate” is similar to “create datum mode”.

How do you isolate parts in Catia?

Isolating a Part

  1. Double-click Sketch1 in Skeleton. …
  2. Go to Assembly Design workbench and click the Update icon or go to Edit > Update and the Update contextual command. …
  3. If you want to make modifications impacting only on Ctx1 (Part2. …
  4. Modify again the CATPart within the Sketcher and return in the Assembly Workbench.
IT IS INTERESTING:  What is Revit cloud rendering?

What is an isolated element in surface design?

Surface Design: What is an isolated element? Element without a history, it has no relation to a parent element.

Special Project