Your question: How do you get different isometric views in Solidworks?

What are the 3 main views of an isometric drawing?

You may be wondering about the three views that are hidden. They are called the Bottom View, the Left Side View, and the Rear View. Can you determine where they go? The next drawing shows the relationship of isometric surfaces to the views in orthographic drawings.

Can you flip isometric view SolidWorks?

(View toolbar), or right-click the view and select Zoom/Pan/Rotate > Rotate View. The Rotate Drawing View dialog box appears. Do one of the following: Drag the view to the desired rotation.

How do you change the view in Solidworks?

Changing the Orientation of the Standard Model Views

1. Do one of the following: Use the Rotate, Zoom, and Pan tools to orient the model. Click View Selector and select a view. …
2. Click Update Standard Views .
3. When prompted, select the standard view you want to assign the current view to.
4. Click Yes to confirm the update.

What are different views in Solidworks?

You can generate drawings of a part or assembly in a variety of view types: Standard 3 View, Model, and Relative views. The part or assembly document must be saved before you can create drawing views of it.

How do you find isometric view?

In an isometric drawing, the object appears as if it is being viewed from above from one corner, with the axes being set out from this corner point. Isometric drawings begin with one vertical line along which two points are defined. Any lines set out from these points should be constructed at an angle of 30 degrees.

How do you crop a view in Solidworks?

To crop a view:

1. In a drawing view, sketch a closed profile such as a circle.
2. Click Crop View. (Drawing toolbar), or click Insert > Drawing View > Crop. The view outside the profile disappears. A circle is drawn on this Section View. After cropping, only the view inside the circle is displayed.

How do I view sections in Solidworks?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

How do I restore a view in Solidworks?

To return all standard model views to their default settings in the Orientation dialog box: In the Orientation dialog box, click Reset Standard Views.

…

Orientation Dialog Box

1. Click View Orientation. …
2. Click View, Modify, Orientation.
3. Press the Space Bar.

How do I change the default isometric view in Solidworks?

Changing the Orientation of the Standard Model Views

1. Do one of the following: Use the Rotate, Zoom, and Pan tools to orient the model. Click View Selector and select a view. …
2. Click Update Standard Views .
3. When prompted, select the standard view you want to assign the current view to.
4. Click Yes to confirm the update.

How do I Rotate a section view?

Use the Rotate tool to rotate a section view or a scope box.

1. Open the project view that contains the section (callout) or scope box to rotate.
2. Select the section (callout) or scope box.
3. Click Modify tab Modify panel (Rotate).
4. Rotate the view.

How do I create a custom view in Solidworks?

Creating a Custom View

1. Use the Rotate, Zoom, and Pan commands to create the desired view. …
2. Press the spacebar to open the Orientation dialog box.
3. In the dialog box, click New View .
4. Type a name in the dialog box and click OK.