Your question: How do I export from Gerber to Altium Designer?

Can Altium import Gerber files?

You can use the File » Import menu options to import the following file types individually or as a selection: Gerber; ODB++; Netlist; Drill; Mill/Rout and DXF/DWG.

How do I export Gerber files?

Drill File Secondary Option

  1. From the Board view of your .brd file, select File -> Run ULP.
  2. Choose the file called drillcfg.ulp.
  3. Select the measurement units for your drill file. …
  4. Select Ok on this screen. …
  5. Choose a file location for your drill files, and that’s it, you have successfully exported your Gerber files!

How do I export Gerber KiCad?

In KiCad, open your PCB design file and go to File -> Plot, or find the plot icon on the main interface. This will bring up the plot window. Select an output directory for your Gerber Files and select the following layers and options.

How do I import Gerber files?

Open up the board editor and then go to File -> Import -> Gerber…. and it’ll open up a dialog for gerber importing.

Can Altium open ODB ++ files?

Altium ODB++ File Generation

Open your design in Altium and navigate to the PCB view. To open the ODB++ export window click File -> Fabrication Outputs -> ODB++ Files. Selecting ODB++ from the fabrication output menu will bring up the following window showing the output options.

IT IS INTERESTING:  What benefits do architects get?

How do I export a drill file from Altium?

How to Generate NC Drill File by Altium Designer? In the main interface of Altium Designer, click File>>Fabrication Outputs>>NC Drill Files sequently and come to NC Drill Setup dialogue in which options need to be specified including NC Drill Format, Leading/Trailing Zeroes, Coordinate Positions etc.

What is Gerber file and what is the use of that?

The Gerber format is an open ASCII vector format for printed circuit board (PCB) designs. It is the de facto standard used by PCB industry software to describe the printed circuit board images: copper layers, solder mask, legend, drill data, etc.

How do I export from Altium PCB?


  1. Click on an *. OutJob file in the Projects panel.
  2. Click [Add New Export Output] under Export Outputs.
  3. Choose Export STEP » [PCB Document].
  4. Double-click the resulting Export STEP entry in the Export Outputs region.

How do I create an ODB ++ file in Altium?

In an active PCB document, click File » Fabrication Outputs » ODB++ Files. The output will be generated immediately upon clicking OK in the dialog.

How do you make a drill table in Altium?


  1. Click Place » Drill Table command from the main menus.
  2. Right-click in the design space then choose Place » Drill Table from the context menu.

Can KiCad open Gerber files?

Note: There are many gerber viewers available. I enjoy using Gerbv but the built-in viewer to KiCad works well so that’s the one we will discuss. Once KiCad’s GerbView is open, click on File -> Load Gerber File. Select all the files shown and click Open.

IT IS INTERESTING:  Do interior designers make floor plans?

How do I create a Gerber file?

How To Create a Gerber File Using Eagle

  1. Step 1: Open the CAM Processor. In Eagle, open Board view. …
  2. Step 2: Open a predefined job. …
  3. Step 3: Adding a second silk screen (Optional) …
  4. Step 4: Create each gerber file. …
  5. Step 5: Adding file for drill holes. …
  6. Step 6: Check output files.
Special Project