Your question: How do I copy a line from AutoCAD to Revit?

Can you copy lines from CAD to Revit?

Just Link the CAD File into Revit. Make the changes in the CAD File to see changes. Start a New Project, create a Legend View, Import the CAD File & Explode. Change the CAD lines Text & Hatches into native Revit. …

How do I copy and paste from AutoCAD to Revit?

Go to the file you want to copy from, highlight the objects to copy and type “Ctrl-C” (that is, hold down the Ctrl key and type “C”). Then open the file you want to paste that element into and type “Ctrl-V.”

How do I import CAD details into Revit?

Help

  1. Click View tab Create panel (Drafting View).
  2. Enter a name and appropriate scale for the new drafting view.
  3. Click Insert tab Import panel (Import CAD).
  4. Select the detail and CAD format.
  5. Select the Current View Only option if you are in a detail view. …
  6. Click Open to place the CAD detail.
IT IS INTERESTING:  Frequent question: How do i open civil 3d in autocad?

How do you trace lines in AutoCAD Revit?

You bring the CAD file into Revit by using Link CAD on the Insert tab. To trace over the CAD file with Revit geometry, use a tool (such as Wall) in the Architecture tab, and move the cursor to locate relevant points and centerlines. You can place objects roughly and then use the Trim and Extend tools.

How do I import a text file into Revit?

– Autodesk Community – Revit Products.



  1. Create a Legend view or a Detail view, depending on how there are to be referenced.
  2. Create one ‘word’ using the Text routine.
  3. Open your external . …
  4. go badck to RAC, Highlight the one “word” you just created, and hit the Ctrl>V keys to replace with the txt text….

How do I copy text in AutoCAD?

The steps are below:

  1. Copy (CTRL+C) numerical text. ( this can be from word, notepad, ect., as long as it is all numerical)
  2. In AutoCAD 2012 and before ,with Dynamic Input on, start the CIRCLE command (center, radius)
  3. After clicking the first point, use the CTRL+V to paste the text into the radius box.

How do I copy text from Word to AutoCAD?

07/14/2014

  1. To Copy Text cleanly from Microsoft Word into AutoCAD or Revit:
  2. Step One: Highlight the text in Word & COPY to Clipboard (CNTRL+C)
  3. Step Two: In either AutoCAD or Revit begin the TEXT command.
  4. Step Three: Click out in the drawing area to begin the text box.
  5. Step Four: Paste the text into the text box (CNTRL+V)
IT IS INTERESTING:  What does sketch do in Solidworks?

Why can’t I see my linked CAD file in Revit?

Causes: The CAD file has values much higher than the 20 mile limit for geometry from internal origin that was applied for Revit. The values themselves are not a problem but the CAD file has reference blocks that refer to 0,0,0 which is the cause of not displaying the CAD link.

Can you open DWG file in Revit?

Revit supports the import of ACIS objects contained in DWG, DXF, DGN, and SAT files. You can incorporate a Trimble® SketchUp® design into a Revit project to provide a starting point for the building model.

How do you trace topography in Revit?

Create a Toposurface by Placing Points

  1. Open a 3D view or a site plan view.
  2. Click Massing & Site tab Model Site panel (Toposurface).
  3. On the Options Bar, set a value for Elevation. …
  4. Next to the Elevation text box, select one of the following: …
  5. Click in the drawing area to place points. …
  6. Click (Finish Surface).

What Revit command would you use to start the conversion of the CAD details to Revit elements?

Instead, go to the Annotate tab and start the Detail Line command from the Detail panel. Select one of the Line Styles and then select the “Pick Lines” option on the Draw panel.

Special Project