Your question: Can you create pocket as first feature in Catia?

Is it possible to create pocket or groove as first features in Catia?

Yes, using the MULTIPAD option OR using simple PAD and in simple PAD select GOTO PROFILE option. 7) What is DRAFTED FILLETTED POCKET? It performs drafting, pocket& filleting simultaneously.

How do you put a pocket in Catia?

Creating a pocket consists in extruding a profile or a surface and removing the material resulting from the extrusion. The application lets you choose the limits of creation as well as the direction of extrusion. The limits you can use are the same as those available for creating pads.

Can you create a pad using Open profile?

The application allows you to create pads from open profiles provided existing geometry can trim the pads.

Can you create a pad using open profile in Catia?

The pad below has been created from an open profile which both endpoints were stretched onto the inner vertical faces of the hexagon. The option used for Limit 1 is Up to next . The inner bottom face of the hexagon then stops the extrusion. Conversely, the Up to next option could not be used for Limit2 .

Is it possible to create pocket as first features?

If your insert a new body and create a pocket as the first feature of this body, the application creates material: Pockets can also be created from sketches including several profiles. These profiles must not intersect.

Can we redefine the sketches?

Answer : Right click on the sketch whose reference plane is to be changed and select the change reference plane and then select new reference. Question 31.

How do you make a shaft in Catia?

Open the Revolution. CATPart document and make sure that PartBody is set as current. Select Sketch.

…

An open profile (not even closed by the revolution axis) cannot be be used as the first feature in a body.

1. Click Shaft . …
2. Click OK to close the warning message and display the Shaft Definition dialog box.

Where is sketch based features in Catia?

Sketch-Based Features Toolbar



To choose your display mode, use the View -> Toolbars -> Sketch-Based Feature (Extended/Compact) command.

Where is open profile in Catia?

You can use Sketch Analysis tools in Catia by navigating Tools > Sketch Analysis. Which can easily check and highlight the open profile even in complex shape. Hope this works for you.

How do you make a pad?

How to create an ambient synth pad from scratch

1. Step 1: Start from an initialised patch. …
2. Step 2: Balance the filter cutoff, resonance and envelope settings together. …
3. Step 3: Add another digital layer; this time a flutey/breathy sample. …
4. Step 4: Now add some reverb across the pad to give it space and depth.

How do you edit pads in Catia?

Editing the Pad

1. You can do it in the specification tree if you wish.
2. In the Pad Definition dialog box that appears, enter 90 mm as the new length value.
3. Click OK . …
4. Now select Part Body .
5. Select the Edit -> Properties command and click the Graphic tab to change the color of your part.

What is difference between AutoCAD and Catia?

CATIA has features like Assembly, sheet metal design, weldment, while AutoCAD does not have these features. AutoCAD cannot calculate lifecycle management, while CATIA can. CATIA has mold design tools, while AutoCAD does not have them. CATIA can perform simulation on any product.