You asked: How do you separate parts in Revit?

How do you edit parts in Revit?

Edit a Part Division

  1. Select one of the parts that resulted from dividing a larger part.
  2. Click Modify | Parts tab Part panel (Edit Division). The original part displays in light blue and the division lines in green.
  3. In this edit mode, you can do the following: …
  4. Click (Finish) to exit the edit mode.

How do you create parts in Revit?

Click Modify tab Create panel (Create Parts). In the drawing area, select the elements from which you want to create parts. Only elements that are eligible for part creation will be selectable when the tool is active; ineligible elements display in half-tone. Press Enter or the Spacebar to complete the action.

How do you split a wall in Revit?

Split Walls Horizontally

  1. Click Modify tab Modify panel (Split Element).
  2. Place the cursor on the wall or line at the point you wish to split. Note: A stacked wall can only be split vertically. …
  3. Click to place the split. A permanent horizontal line displays on the wall indicating the split.

What is parts in Revit?

About Parts



Part elements in Revit support the construction modeling process by letting you divide certain elements from the design intent model into discrete parts.

IT IS INTERESTING:  What is join command in autocad?

How do you move parts in Revit?

Do one of the following:

  1. Select the elements to move, and then click Modify | tab Modify panel (Move).
  2. Click Modify tab Modify panel (Move), select the elements to move, and then press Enter .

How do you split a slab in Revit?

Split a Roof or Structural Floor

  1. Select the floor to modify.
  2. Click Modify | Floors tab Shape Editing panel Add Split Line.
  3. Select a vertex, edge, face or point anywhere on the structural floor to start the split line. …
  4. Select another vertex, edge, face or point anywhere on the floor to end the split line.

How do you split a wall with two colors?

To divide a wall with two paint colors vertically, choose a point on the wall where you want the two colors to meet, apply the first color which goes past that point, mark a vertical dividing line with a pencil or chalk, apply masking tape following that line, apply the second color on the remaining part of the wall …

How do you paint a half wall in Revit?

Click to select the wall face to split. Then, from the draw panel, select a tool to sketch the area to split. Like other sketch based elements in Revit, the sketch for the split face must form a closed loop. Click Finish to complete the split face area.

How do you rejoin a split wall in Revit?

You can remove a split in the wall by going to a top view and dragging the wall at the split away from the other, then dragging it back. Now it’s one wall again.

IT IS INTERESTING:  How do i divide a circle in autocad?
Special Project