You asked: How do you get a void extrusion in Revit?

How do you create a void blend in Revit?

In the Family Editor, on the Create tab Forms panel, do one of the following:

1. Click (Blend).
2. Click Void Forms drop-down (Void Blend).

How do you make a void extrusion in a wall in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

How do you create a void extrusion?

Click in the drawing area, and draw a closed loop that intersects solid geometry. Select the closed loop. Click Modify | Lines tab Form panel Create Form drop-down (Void Form). A void form extrusion is created.

How do you make a void roof in Revit?

Choose “Void extrusion” to create an In-place family roof. Pick the line on the base of the inside edge of the roof to draw the void in a section view. The “cut geometry” command can be used to select the roof over the void. To execute the cut, click “Finish” after that.

Why is my void extrusion orange?

“When you create a void form while in the Family Editor, it will appear in the 3D views as a transparent form and as orange lines in plan and elevation views, as long as it is not cutting any solid geometry.” So, if it’s not cutting anything, then it’ll be orange.

How do you cut geometry in Revit?

Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

How do you make a void family in Revit?

Create a Void Family with an Elliptic Profile

1. Create a new family using the Metric Generic Model face based. …
2. Select the 3D Front view.
3. Click Create tab Datum panel (Reference Plane).
4. Place a new horizontal reference plane in the middle of the slab extrusion:
5. Select the new reference plane.
6. In the Properties palette:

What is void extrusion?

A solid or void extrusion is the easiest form to create. You sketch a 2D profile of the form on a work plane, and then extrude that profile perpendicular to the plane on which you sketched it.

How do I make a wall extrusion in Revit?

Create an Extrusion

1. In the Family Editor, on the Create tab Forms panel, do one of the following: …
2. Use the sketching tools to sketch the extrusion profile: …
3. On the Properties palette, specify the extrusion properties: …
4. Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode). …
5. To view the extrusion, open a 3D view.

How do I create a reveal wall in Revit?

Add a Wall Reveal

1. Open a 3D or non-parallel elevation view.
2. Click Architecture tab Build panel Wall drop-down (Wall: Reveal).
3. In the Type Selector, select the desired type of wall reveal.
4. Click Modify | Place Wall Reveal Placement panel, and select the orientation of the wall reveal: Horizontal or Vertical.