You asked: How do you add a bend line to a flat pattern in Solidworks?

How do you show a bend note in Solidworks drawing?

Select the flat pattern drawing view to display the Drawing View PropertyManager. Click More Properties. In the View Properties tab, clear Display sheet metal bend notes.

How do you fix a flat pattern in Solidworks?

Correcting the flatten configuration

1. Open the part file within SOLIDWORKS.
2. Enable the FLAT-PATTERN configuration within the configuration tab (the Flatten tool will likely be un-toggled)
3. If the Flatten tool is un-toggled, re-enable it so the sheet metal returns to its flatten state.

How do you show a flat pattern in Solidworks?

Creating Drawings of Flat Patterns

1. Open the sheet metal part for which you want to add a drawing.
2. Click Make Drawing from Part/Assembly. …
3. Select a format or click OK to use the default format.
4. From the View Palette, drag the Flat pattern to the drawing sheet. …
5. Click .

How do you bend a dimension line in Solidworks?

Right-click a dimension extension line and select Display Options > Jog. Horizontally or vertically drag a point on the dimension extension line to create a bend.

How do you hide a bend line in Solidworks?

Toggling the Visibility of Bend Lines

1. In the FeatureManager design tree, expand Drawing View to show the Flat-Pattern. feature.
2. Expand the Flat-Pattern. feature, right-click Bend-Lines and select Show or Hide.

How does sheet metal work in Solidworks?

To do this we simply need to right-click any tab on the CommandManager and select Sheet Metal from the drop down menu. Next, we will activate the Sheet Metal tab of the Command Manager and click Base Flange/Tab tool, which should be the first tool on the right not grayed out when beginning a part.

How do I flatten a bent part in Solidworks?

To flatten a body, do one:

1. In the FeatureManager design tree, select the part and click Flatten. (Sheet Metal toolbar).
2. In the cut list, right-click the body and click Flatten. .
3. In either the FeatureManager design tree or the cut list, right-click the Flat-Pattern. feature for the part and click Unsuppress. .

What is flat pattern making?

A patternmaker typically employs one of two methods to create a pattern. The flat-pattern method is where the entire pattern is drafted on a flat surface from measurements, using rulers, curves and straight-edges. A pattern maker would also use various tools such as a notcher, drill and awl to mark the pattern.

How do I change the bend line style in Solidworks?

To change the format or language of the bend line notes, set Format to Exchange, then in Tools > Options > System Options > File Locations, set Show folders for to Sheet Metal Bend Line Note File, and set the file location to the desired format or language.

How do you find the bend line?

The formula (See Bending Formulas) is: Bend Allowance = Angle * (π / 180) * (Radius + K-factor * Thickness).

How do you bend a metal sheet size?

For bends, the minimum distance between the inside edge of the bend and the outside of the hem should be 5 times material thickness plus bend radius plus hem radius.