What is blind in Solidworks?

What is a blind cut solidworks?

Blind: A specified distance. Through All: Through the entire part in one direction, normal to the sketch plane. Through All – Both: Through the entire part in two directions, normal to the sketch plane. Up To Next: Up to the next surface of the part.

What is the difference between blind and through all in Solidworks?

Blind. Extends the feature from the sketch plane for a specified distance. Through All. Extends the feature from the sketch plane through all existing geometry.

What is extrude boss base in Solidworks?

The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face. Figure 3: Selecting a Plane. Using the 2D sketch or plane to create a 3D model, the Boss-Extrude feature button will prompt you to set parameters in the menu shown in Figure 4.

What is extrude boss?

Extrude tool is used to extend a sketched profile in one or two directions as either a thin feature or a solid feature. An extrude operation can either add material to a part (in a base or boss) or remove material from a part.

IT IS INTERESTING:  How do you make a mirror plane in Fusion 360?

What does thin feature do in Solidworks?

The thin feature allows you to cut in one direction, from the midplane, or in two separate directions. Cutting in one direction allows you to cut to either side of the sketch at a determined distance. Cutting from the midplane will allow the cut to be spaced equally on both sides of the sketch.

What is Hole Wizard in Solidworks?

Hole Wizard is a tool inside SOLIDWORKS that allows you to quickly create holes within a part or assembly without the need of drawing or using multiple features.

What is Fillet in SOLIDWORKS?

Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops.

What are parents in SOLIDWORKS?

In the model or in the FeatureManager design tree, right-click an entity and select Parent/Child. Parents. Lists the parent features of the selected entity. A parent feature is an existing feature upon which others depend. For example, an extrude is the parent feature to a fillet that rounds its edges.

How do you use extruded cuts?

Creating Extruded or Revolved Cuts as Assembly Features

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Extrude or Revolve PropertyManager.

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

IT IS INTERESTING:  Question: Why does SketchUp keep freezing?

What is a vertex in Solidworks?

Control vertices are similar to spline points. They help you manage the shape of the curve. You can add dimensions between control vertices and add relations. To insert a control vertex: In an open sketch, right click anywhere on the control polygon and select Insert Control Vertex .

Can an open sketch be extruded in Solidworks?

Allows you to use a partial sketch to create extrude features from open or closed contours. Select sketch contours and model edges in the graphics area.

How do you do a sweep in Solidworks?

To create a sweep: Sketch a closed, non-intersecting profile on a plane or a face.

Click one of the following:

  1. Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep.
  2. Swept Cut on the Features toolbar or Insert > Cut > Sweep.
  3. Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.

What is merge result solidworks?

The Merge results option of the Base Flange/Tab command lets you merge bodies with coplanar faces. To merge sheet metal bodies by adding a base flange: in a multibody sheet metal part, move the bodies to be merged to the same plane.

How do you copy a sketch in Solidworks?

To copy and paste a sketch:

  1. Select the closed sketch in the FeatureManager design tree.
  2. Click Edit > Copy or press Ctrl+C.
  3. Click in the sketch or document where you want to paste the center of the sketch.
  4. Click Edit > Paste or press Ctrl+V.
Special Project