What is a broken pointer solidworks?

What is a broken view in Solidworks?

You can use a broken (or interrupted) view in a drawing. Broken views make it possible to display the drawing view in a larger scale on a smaller size drawing sheet. You create a gap or break in the view using a pair of break lines.

What is broken section?

A broken section is a cut-away view of the interior of a part. It is a section view displayed inside a 2D boundary where an existing view of the part has been cut away.

What is a broken-out view?

A broken-out section view cuts away a portion of an assembly in a drawing view to expose the inside. Cross hatching is automatically generated on the sectioned faces of all components. A broken-out section is part of an existing drawing view, not a separate view.

How do you change a broken-out in Solidworks?

To delete or edit a broken-out section:

  1. Right-click the broken-out section in the FeatureManager design tree and select one of the following.
  2. Delete.
  3. Edit Definition. Set options in the Broken-out Section PropertyManager , then click OK .
  4. Edit Sketch. Select the sketch entity and edit it, then close the sketch.
IT IS INTERESTING:  How much does a Fusion 360 designer make?

How do you break an angle view in Solidworks?

In the PropertyManager, under Alignment: Choose the plane and rotation angle for the break.

Do one of the following:

  1. Click Insert > Model Break View.
  2. Click Model Break View (MBD toolbar).
  3. In the ConfigurationManager , right-click a configuration and click New Model Break View .

How do you remove a break view in Solidworks?

Right-click the broken view, and select Un-Break View. The break lines remain in the view and you can delete them.

What is aligned section?

An aligned section view is drawn as if the cutting plane line ran straight across the object. The cutting plane line is rotated into a straight position, and the section view is projected.

What is half section view?

A half-section is a view of an object showing one-half of the view in section. Half Section. • Symmetrical parts can be shown in half sections.

How do you crop a view in Solidworks?

To crop a view:

  1. In a drawing view, sketch a closed profile such as a circle.
  2. Click Crop View. (Drawing toolbar), or click Insert > Drawing View > Crop. The view outside the profile disappears. A circle is drawn on this Section View. After cropping, only the view inside the circle is displayed.

What are the different views in Solidworks?

You can generate drawings of a part or assembly in a variety of view types: Standard 3 View, Model, and Relative views. The part or assembly document must be saved before you can create drawing views of it.

How do you modify a broken out view in Solid Edge?

Select the broken-out section view profile to edit the broken-out section view. You can use the options on the Broken-Out Profile Selection command bar to modify the profile or extent depth of the broken-out section view. Select the broken-out section view profile to delete it using the Delete key.

IT IS INTERESTING:  How do I change autosave settings in Revit?

What is an auxiliary view in Solidworks?

An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding.

What is offset section?

An offset section is a means of including in a single section several features of an object that are not in a straight line. To do this, the cutting plane line is bent, or “OFFSET” to pass through the features of the part.

How is a cutting plane represented?

Explanation: A cutting plane is represented on a drawing by a cutting plane line. This is a heavy long-short-short-long kind of line terminated with arrows. The arrows in show the direction of view.

Special Project