What does the thin feature do in Solidworks?

What does the cut-extrude feature do?

Extruded cut feature removes material from the part. The End Condition, Draft, and Thin Feature options are same as described in Extruded Boss/Base. To create an extruded cut: 1) Sketch the profile for cut. 2) Click Extruded Cut on the Features toolbar or select Insert, Cut, Extrude on the menu bar.

How do you cut an object in Solidworks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

Can you extrude open contours solidworks?

Single open contours can be used for extrudes, revolves, sections, paths, guides, and sheet metal. 9.

What is a thin feature?

The thin feature allows you to cut in one direction, from the midplane, or in two separate directions. Cutting in one direction allows you to cut to either side of the sketch at a determined distance.

IT IS INTERESTING:  How do I update my Ansys License Manager?

What feature removes material from a solid to create a thin walled feature?

A cut is a feature that removes material from a part or an assembly.

What is extrude thin?

The Thin Feature tool takes the sketched profile and creates a constant thickness in the sketch plane. One good example of this is a hollow tube. Instead of creating two circles in the sketch, you can just sketch one and then specify the thickness within the Extrude.

What is Hole Wizard in Solidworks?

Hole Wizard is a tool inside SOLIDWORKS that allows you to quickly create holes within a part or assembly without the need of drawing or using multiple features.

Where is extrude thin feature solidworks?

To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature. When you drag the manipulator to set the size, an Instant3D ruler appears so you can set precise values.

How do you make lips in Solidworks?

Create a lip or groove fastening feature by clicking Lip/Groove (Fastening Features toolbar) or Insert > Fastening Feature > Lip/Groove.

What is fillet in Solidworks?

Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops.

How do you merge features in Solidworks?

To add bodies together:

  1. Click Combine. (Features toolbar) or Insert > Features > Combine.
  2. In the PropertyManager, under Operation Type, select Add.
  3. For Bodies to Combine, select the bodies to combine. You can select bodies in the graphics area or the Solid Bodies. …
  4. Click Show Preview to preview the feature.
  5. Click .
IT IS INTERESTING:  How do you scale an object to a line in AutoCAD?

What are contours in SolidWorks?

A Contour is simply an enclosed shape. We see them all the time in circles, rectangles, and squares. The more closed contours we add into our sketch, the more complex it becomes. These multiple Contours create regions in our sketches as seen below.

Whats an open contour?

Contours can be either open or closed. A contour must be closed to obtain measurements of the area within the contour. An open contour can be used to measure the length of a curved line.

Special Project