What does the split line feature do in Solidworks?

What do you mean by split line?

2 to separate or be separated from a whole.

How do you split a line in Solidworks?

To create a projection split line:

1. Click Split Line. (Curves toolbar) or Insert > Curve > Split Line.
2. In the PropertyManager, under Type of Split, select Projection.
3. Under Selections, click: A sketch for Sketch to Project. . You can select multiple contours from the same sketch to split. …
4. Click . Before. After.

What is the purpose of the parting line?

A parting line is a borderline in which draft angles change direction or a dividing line that splits the core and cavity halves of a molded part. It can also be used as a starting point for the mold parting surface.

Why are parting lines important?

The parting line of a die cast component represents where the two different sides of the mold come together. This line often (but not always) marks the border between the inside and outside of the part. The location of the parting line indicates which side of the die is the cover and which is considered the ejector.

What does the split line feature do quizlet?

The split line option can be used to “divide” a surface into two or more surfaces. Several surfaces can be lofted together to form a solid feature. Surfaces cannot be moved or copied into a part document.

How do I project a line in Solidworks?

To project a curve: Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.

How do you split a surface?

To split a surface:

1. Open install_dir sampleswhatsnewpartssplit. …
2. Click Split (Mold Tools toolbar) or Insert > Features > Split.
3. In the graphics area, select Surface-Extrude1 for Trimming Surfaces .
4. In the PropertyManager, under Target Bodies, click Selected bodies.

What are the effects of parting line on core and cavity?

Stepped Parting Line

This causes a relative possibility of sliding between the fixed and moving halves of the mold. This force can then be canceled out by generating an injection force on both sides of the cavity. There’s also a possibility of the generated force being too large or too small.

What is the difference between parting line and parting surface?

Parting Line and Parting Surface

It is a line that splits the mold into two parts – the core and the cavity. The concept of a parting surface is similar. A parting surface is a surface that separates the mold block into two parts – the core and the cavity.

What is core and cavity?

The core is the male part which forms the internal shape of molding. The cavity is the female part which forms external shape of molding.

Where do you put a parting line?

The outer face is formed by one mold half (A-side), while the cup’s inner surface and brim will be formed by the other mold half (B-side). The parting line occurs along the outside edge of the brim of the cup.

What is runner in casting?

Runners are connected channels that convey the molten metal to different parts of the mould. A well-designed running system can regulate the speed of the molten metal, avoid shrinkage and minimise turbulence.

What is the the criteria for parting line selection?

The criteria with high priority are number of undercuts, draft, projected area and dimensional stability. Criteria with medium priority are draw, flash, flatness and placement of ejector pins.