What does the F mean in Solidworks assembly?

What does the (-) mean in SOLIDWORKS?

ago. Additional comment actions. The (-) means its not fully constrained/defined.

What does assembly mean in SOLIDWORKS?

You can build complex assemblies consisting of many components, which can be parts or other assemblies, called subassemblies. For most operations, the behavior of components is the same for both types. Adding a component to an assembly creates a link between the assembly and the component.

What is float in SOLIDWORKS assembly?

To fix or float an assembly component: Right-click the component in the graphics area or the component’s name in the FeatureManager design tree. Select Fix or Float. … You can also control in a design table whether the position of a component is fixed or floating. See Fixed or Floating Position in Configurations.

What are the types of assembly in SOLIDWORKS?

Standard mates include angle, coincident, concentric, distance, lock, parallel, perpendicular, and tangent mates. Advanced mates include limit, linear/linear coupler, path, symmetry, and width mates. Mechanical mates include cam-follower, gear, hinge, rack and pinion, screw, and universal joint mates.

Why is my sketch under defined?

In this tech tip we’ll answer the common question: Why is my SOLIDWORKS Sketch Pattern Under Defined? The reason is because the sketch instances can rotate. You could previously Fully Define the instances by adding a Horizontal or Vertical relation on one of the construction lines tied to the instances.

What is a contour in Solidworks?

A Contour is simply an enclosed shape. We see them all the time in circles, rectangles, and squares. The more closed contours we add into our sketch, the more complex it becomes. These multiple Contours create regions in our sketches as seen below.

What is a boss in Solidworks?

One of the oldest commands in the SOLIDWORKS software is the boss/base extrude command. An Extruded Boss/Base feature will allow you to take a 2D sketch and add thickness to it in the third dimension. Every few releases, this feature gets some terrific functionality added to it.

What is a virtual assembly in Solidworks?

SOLIDWORKS Video Tech Tips

Virtual components are used for assembly modeling in SOLIDWORKS and they are special parts because they are saved internally in the assembly file instead of in a separate part or subassembly file. This means they only exist inside the assembly and not physically on the hard drive somewhere.

How do assemblies work in Solidworks?

To create an assembly from a part:

1. Click Make Assembly from Part/Assembly (Standard toolbar) or File > Make Assembly from Part. An assembly opens with the Insert Component PropertyManager active.
2. Click in the graphics area to add the part to the assembly. SOLIDWORKS makes the first component fixed.

Where is the float option in Solidworks?

To change the fix or float, go to featuremanager deign tree. Select and right click on the component’s name for changing the fix or float condition. Select fix or float from the appearing menu as per your requirement. This way you can fix component or float it in solidworks assemebly interface.

How do you mate in Solidworks?

To add a mate: Click Mate (Assembly toolbar), or click Insert > Mate. In the PropertyManager, under Mate Selections, select the entities that you want to mate together for Entities to Mate . You can temporarily hide faces to select an obscured face by hovering over a face and pressing Alt.

How do you ground a part in Solidworks assembly?

To define a ground plane:

1. In an assembly, click Insert > Reference Geometry > Ground Plane.
2. In the PropertyManager, in Ground Plane, select a face in the assembly.
3. (Optional.) Click Reverse Direction , or click the handle in the graphics area.
4. Click . Ground Plane appears in the FeatureManager design tree.

What is bottom up assembly SOLIDWORKS?

Bottom-up design is the traditional method. You first design and model parts, then insert them into an assembly and use mates to position the parts. To change the parts, you must edit them individually. These changes are then seen in the assembly.

What is top-down assembly in SOLIDWORKS?

In top-down assembly design, one or more features of a part are defined by something in an assembly, such as a layout sketch or the geometry of another part. The design intent comes from the top, which is the assembly, and moves down to the parts.

Is SOLIDWORKS top-down or bottom up?

Top-down design is also referred to as “in-context design” in the SOLIDWORKS Help. In Top-down design, parts’ shapes, sizes, and locations can be designed in the assembly.