What does over defined mean in Solidworks?

How do you correct an over defined sketch in Solidworks?

To manually repair over defined sketches:

  1. In the PropertyManager, under Message, click Manual Repair. All relations and dimensions in the sketch appear under Conflicting Relations/Dimensions.
  2. Select each relation or dimension to highlight it in the graphics area. For example: …
  3. Click Delete. Valid solution found. …
  4. Click .

How can you define an over defined sketch?

Over defined dimensions and relations are shown in a different color than the resolved sketch entities.

What does under defined mean in SOLIDWORKS?

SOLIDWORKS 2016 – Instances Under Defined. The reason is because the sketch instances can rotate. You could previously Fully Define the instances by adding a Horizontal or Vertical relation on one of the construction lines tied to the instances. SOLIDWORKS 2016 – Instances Can Rotate.

How do I undo a SOLIDWORKS rebuild error?

To control the rebuild action:

  1. Click Options (Standard toolbar) or Tools, Options.
  2. Select Stop, Continue, or Prompt for When rebuild error occurs, then click OK.
IT IS INTERESTING:  How do you make a 3d oval in SketchUp?

How does SOLIDWORKS warn you that a sketch is Underdefined?

Well you could open up all sketches in turn, or check the sketch name for a (-) symbol: this means the sketch is under-defined.

What are two methods of orthographic projection in SOLIDWORKS?

First Angle and Third Angle Projection.

How do you do a composite curve in SOLIDWORKS?

To create a composite curve:

  1. Click Composite Curve. on the Curves toolbar, or click Insert > Curve > Composite.
  2. Click the items (sketch entities, edges, and so on) that you want to join. …
  3. Click .

How do you tell if a part is fully defined in Solidworks?

The sketch is fully defined if the lines on the sketch are all black. This means that there can be no unexpected changes within the model due to all the geometry of the sketch being fully defined.

How do I move a full defined part in Solidworks?

Click Move Component (Assembly toolbar) or Tools > Component > Move. The Move Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.

What color is an over defined sketch?

The sketch tolerates these logically redundant relations. Over defined. Redundant dimensions over define a sketch. The red rectangle is over defined.

How do I make text fully defined in Solidworks?

Sketching Text

  1. Click a face of a part.
  2. Click Text. …
  3. In the graphics area, select an edge, curve, sketch, or sketch segment. …
  4. In the PropertyManager, under Text, type the text to display. …
  5. Set the properties in the Sketch Text PropertyManager as necessary.
  6. Click .
  7. With the sketch still open, extrude or cut the text.
IT IS INTERESTING:  You asked: How do I copy a layout to a model in Autocad?
Special Project