What does it mean to convert entities in Solidworks?

What is convert entities & where is used?

Convert Entities and Offset Entities are two powerful tools you can use when editing a sketch in SOLIDWORKS. Let’s begin with the Convert Entities tool. Whenever we need to make a sketch entity that matches other geometry of our model we can use the Convert Entities tool.

How do I convert entities in Solidworks?

To convert an entity:

1. In an open sketch, click a model edge, loop, face, curve, external sketch contour, set of edges, or set of curves. You can also click an entity after clicking the Convert Entities. …
2. Click Convert Entities. …
3. In the PropertyManager, click Select chain to convert all contiguous sketch entities. …
4. Click .

What is an entity solidworks?

The SOLIDWORKS Convert Entities tool is both useful and powerful in that it will project edges of a face onto the active sketch whether or not the face is parallel to the active sketch. These edges will always be projected as seen when looking normal to the sketch.

What does offset entities do in Solidworks?

Offset entities takes a copy of your existing geometry and copies it at an offset. Instead of recreating geometry, you can use this to quickly sketch based on model geometry. Offset entities is a great tool for enlarging or shrinking your sketch geometry.

How do you mirror entities in Solidworks?

To mirror sketch entities as you sketch them:

1. Select a line or a model edge in an open sketch.
2. Click Dynamic Mirror Entities. (Sketch toolbar) or Tools > Sketch Tools > Dynamic Mirror . …
3. Create the sketch entities that you want to mirror. …
4. To turn mirroring off, click Dynamic Mirror Entities.

How do you draw a construction line in Solidworks?

on the Sketch toolbar. Click Tools > Sketch Tools > Construction Geometry. Select the For construction check box in the PropertyManager. Right-click any selected sketch entity and select Construction Geometry.

What does convert entities mean?

You can create one or more curves in a sketch by projecting an edge, loop, face, curve, or external sketch contour, set of edges, or set of sketch curves onto the sketch plane.

What is SpeedPak solidworks?

SpeedPak creates a simplified configuration of an assembly without losing references. If you work with very large and complex assemblies, using a SpeedPak configuration can significantly improve performance while working in the assembly and its drawing.

How do you use an intersection curve in Solidworks?

Sketching Intersection Curves

on the Sketch toolbar, or Tools > Sketch Tools > Intersection Curve. before selecting a plane). Select the intersecting items: Select a plane that intersects a face of the part.

What are the types of pattern in Solidworks?

Types of Patterns

• Curve Driven Patterns and the Curve Driven Pattern PropertyManager. …
• Linear Patterns and the Linear Pattern PropertyManager. …
• Circular Patterns. …
• Sketch Driven Patterns. …
• Table Driven Patterns. …
• Saving and Loading Table Driven Patterns. …
• Mirror Feature. …
• Fill Patterns.

How do you offset a surface in Solidworks?

Offset Surface

1. Click Offset Surface (Surfaces toolbar) or Insert > Surface > Offset.
2. In the PropertyManager: Select surfaces or faces in the graphics area for Surface or Faces to Offset . Set a value for Offset Distance. You can create an offset surface with a distance of zero. …
3. Click OK .

How can you make sure a sketch is fully constrained?

A sketch is fully constrained when the size and position of all sketch geometry is completely defined.

How do I edit an offset entity in Solidworks?

To change the size of a sketch offset: Double-click the offset’s dimension and change the value. In a bi-directional offset, change the dimensions of the two offsets individually. Search ‘Changing the Offset Size’ in the SOLIDWORKS Knowledge Base.

How do I change the offset direction in Solidworks?

Reversing Sketch Offsets

1. In the Dimension PropertyManager, under Primary Value, click .
2. Double-click the offset dimension of a sketch entity. In the Modify dialog box, do one of the following: Click . Insert a minus sign before the existing dimension value.
3. Right-click the offset dimension and click Reverse Direction.

How do you create an offset plane in Solidworks?

To create an offset plane, select the Reference Geometry drop down on the CommandManager and choose the Plane option. Once the option to create a plane is open, select a face or another plane and set a distance for the offset.