What are hidden lines solidworks?

What is a hidden line?

Hidden lines in a drawing represent the edges where surfaces meet but are not directly visible. Hidden lines are omitted from pictorial drawings unless they are needed to make the drawing clear.

Where are hidden lines used?

Hidden lines are used to show surfaces that are not directly visible. All surfaces must be shown in all views. If an edge or surface is blocked from view by another feature, it is drawn using a hidden line.

What are hidden edges indicated by?

Figure 5: Use of dashed lines to represent edges hidden in views of a complicated object.

How do I delete hidden lines in Solidworks?

Hidden Lines Removed

  1. Click Display Style > Hidden Lines Removed (Heads-up View toolbar).
  2. Click Hidden Lines Removed (View toolbar).
  3. Click View > Display > Hidden Lines Removed.

What is the purpose of a visible line?

The visible object line (also visible line) is used to outline the visible edges of the object being drawn. They should be drawn so that the views stand out clearly on the drawing. All of the visible object lines on the drawing should be the same weight.

IT IS INTERESTING:  Frequent question: How do you develop an enterprise architecture?

What are visible lines?

Visible lines are the edges or “outlines” of an object. They are drawn as solid lines with a thick/heavy weight.

What is the purpose of hidden lines and center lines?

Hidden lines show edges of details that are not visible from the point of view shown in the drawing. Center lines define the center of arcs, circles, or symmetrical parts.

What is the difference between hidden line and center line?

Answer: In a scaled drawing, the hidden line can be measured from the start of the first dash, to the end of the last dash. Centre lines are drawn to indicate the exact centre of a component being drawn. They are made from a series of lighter long and short dashes.

Do auxiliary views have hidden lines?

Later, when you are familiar with drawing auxiliary views, omit hidden lines when they do not add needed information to the drawing. intent. An auxiliary section is simply an auxiliary view in section.

Do you dimension hidden lines?

Avoid dimensioning to hidden lines wherever possible. 7. Dimensions should not be placed on the object unless that is the only clear option. intermediate dimension can nest closer to the object to avoid crossing extension lines.

What do hidden lines in orthographic projection?

What do hidden lines in orthographic projections denote? Explanation: Hidden lines denote those parts which cannot be seen when viewing the object. They are used when there are holes or slots in the object if they cannot be viewed directly. Change of plane is indicated by outlines.

IT IS INTERESTING:  Best answer: How do I hide smart explode lines in Solidworks?

How do you show hidden lines in Solidworks?

To show or hide hidden edges in the Drawing View Properties dialog box:

  1. Right-click the drawing view and select Properties.
  2. Select the Show Hidden Edges tab.
  3. Select a feature or component from either the drawing view or the FeatureManager design tree to add it to the list of items to be shown with hidden lines.

How do you make hidden lines visible in Solidworks?

Click Tools > Options > System Options > Display. Select Solid or Dashed for Hidden edges displayed as. Click OK.

How do you hide lines in Solidworks?

To hide or show edges in a drawing:

  1. Click Hide/Show Edges. …
  2. Select the edges to hide (you can select edges individually, or use box selection), then click . …
  3. To show edges, click Hide/Show Edges. …
  4. Select the hidden edges highlighted in orange, (you can select edges individually, or use box selection), then click .
Special Project