What are guide curves SolidWorks?

What are guide curves?

Guide Curves. Guide curves (A) (B) allow you to control the shape of a lofted or swept surface between the cross sections. You can use a sketch, the edge of an adjacent surface, or a curve that has been projected onto a surface as guide curves.

How do you make guide curves in SolidWorks?

Right-click in the graphics area, choose SelectionManager, then select the guide curve. Put each guide curve in its own individual sketch.

When adding a loft guide curves can be used to?

The guide curves help you control the intermediate profiles that are generated. To create a loft using guide curves and non-planar profiles: Use a split line to create a non-planar profile on a model face. Sketch one or more guide curves.

How do you sweep a curve in SolidWorks?

Use a sketch, existing model edges, or curves. Click one of the following: Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep. Swept Cut on the Features toolbar or Insert > Cut > Sweep.

…

Creating a Basic Sweep.

How do you use the lofted boss base in SolidWorks?

How to create a Lofted Boss/Base in SolidWorks:

1. Sketch your profiles. A minimum of two are required but a higher number of profiles allows you to create more complex shapes. …
2. Select the Loft Feature, then choose the profiles in order. …
3. Adjust the Constraints and options as required.

What is loft in SolidWorks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

How do you loft a curved surface in SolidWorks?

To create a lofted surface:

1. Create a plane for each profile section of the loft. The planes do not need to be parallel.
2. Sketch the section profiles on the planes. …
3. If necessary, create guide curves. …
4. Click Lofted Surface (Surfaces toolbar) or Insert > Surface > Loft.
5. Set the PropertyManager options. …
6. Click OK .

What features were used to create the chisel?

What features were used to create the chisel? Loft and flex.

How do you make a 3D sketch in SolidWorks?

To create a 3D sketch, click 3D Sketch (Sketch toolbar) or Insert > 3DSketch . You can create 3D sketch entities on a working plane, or at any arbitrary point in 3D space. In 3D sketching, a graphical space handle helps maintain your orientation while you sketch on several planes.

How can you tell if you are sketching on a different sketch plane?

How can you tell if you are sketching on a different sketch plane? The coordinate triad has changed its position to represent the position of the plane you are sketching on.

What are applied features in Solidworks?

Applied features such as chamfers, fillets, and shells are applied directly to the model.