Quick Answer: What is a closed sketch in Solidworks?

How do you check if a sketch is closed in SolidWorks?

To check a sketch for feature usage:

1. In an open sketch, click Tools > Sketch Tools > Check Sketch For Feature. …
2. Click Check. …
3. To check your sketch for possible use in other feature types, select another type in Feature usage and click Check.
4. Click Reset to return to the original Feature usage type.
5. Click Close.

What is an open sketch SolidWorks?

Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.

How do you lock a sketch in SolidWorks?

Locking Dimensions

1. In an open sketch, click Smart Dimension. …
2. Click the items to dimension.
3. Move the pointer. …
4. Right-click to lock. …
5. Move the pointer around until the dimension is correctly located.
6. Click to place the dimension.
7. Set the value in the Modify box and click .

Where are SOLIDWORKS tools?

To display SOLIDWORKS toolbars: Right-click in the window border, click Toolbars, and select or clear a toolbar name. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.

How do you analyze a sketch in SOLIDWORKS?

To check a sketch for feature usage: In an open sketch, click Tools > Sketch Tools > Check Sketch For Feature. In the dialog box, Feature usage lists all of the ways to use the sketch in a feature: If the sketch was used to create a feature, the feature type is displayed in Feature usage.

How do you close a small gap in SOLIDWORKS?

Right-click a gap in the list and select Gap Closer. In the graphics area, drag the gap edge handle with the pointer to the side of another edge (not the handle). When the original edge turns green, right-click in the graphics area or the PropertyManager and select Finish Gap Closer.

What is contour geometry in SOLIDWORKS?

A Contour is simply an enclosed shape. We see them all the time in circles, rectangles, and squares. The more closed contours we add into our sketch, the more complex it becomes. These multiple Contours create regions in our sketches as seen below.

Why is my sketch not fully defined?

In this tech tip we’ll answer the common question: Why is my SOLIDWORKS Sketch Pattern Under Defined? The reason is because the sketch instances can rotate. You could previously Fully Define the instances by adding a Horizontal or Vertical relation on one of the construction lines tied to the instances.

How do you tell if a sketch is fully defined?

FULLY DEFINED SKETCH



The sketch is fully defined if the lines on the sketch are all black. This means that there can be no unexpected changes within the model due to all the geometry of the sketch being fully defined.

What is fully defined sketch?

The Fully Define Sketch tool calculates which dimensions and relations are required to fully define under defined sketches or selected sketch entities. You can access Fully Define Sketch at any point and with any combination of dimensions and relations already added.

How do you hide a sketch relationship in Solidworks?

Click Tools > Sketch Settings, and toggle Automatic Relations. How do I toggle the display of sketch relations? (View toolbar) or View > Hide/Show > Sketch Relations to toggle the display of sketch relations.