Quick Answer: How do you make a hole in the floor in Revit?

How do you create a void in a floor in Revit?

Create a Void Form

  1. On the Create tab Draw panel, select one of the drawing tools.
  2. Click in the drawing area, and draw a closed loop that intersects solid geometry.
  3. Select the closed loop.
  4. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).

How do you make a void family in Revit?

Create a Void Family with an Elliptic Profile

  1. Create a new family using the Metric Generic Model face based. …
  2. Select the 3D Front view.
  3. Click Create tab Datum panel (Reference Plane).
  4. Place a new horizontal reference plane in the middle of the slab extrusion:
  5. Select the new reference plane.
  6. In the Properties palette:

How do you cut a vent hole in a subfloor?

How to Cut an Air Vent in a Wood Floor

  1. Place your vent in place on the floor where you want to cut the hole. …
  2. Insert a 1/2-inch drill bit into a drill/driver. …
  3. Insert the blade of the reciprocating saw into the hole. …
  4. Back the saw up 1 inch. …
  5. Insert the blade back into the hole. …
  6. Drop the air vent into the hole.

What does cut with voids when loaded mean in Revit?

“Cut with Voids When Loaded: When selected, voids created in the family will cut through solids. The following categories can be cut by voids: ceilings, floors, generic models, roofs, structural columns, structural foundations, structural framing, and walls.”

IT IS INTERESTING:  Quick Answer: How do you daylight in Civil 3D?

How do you make a generic void in Revit?

Create a void through the solid geometry. Create another solid geometry shape and join it to the existing geometry. Click Modify tab Geometry panel Cut drop-down (Cut Geometry) and select the void you created.

How do you cut Geometry in Revit?

Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

Special Project