Quick Answer: How do you cut boundaries in Solidworks?

How do I make a boundary cut?

Tutorial – Boundary cut feature in SolidWorks?

1. Start SolidWorks in Part mode.
2. Front Plane>>Sketch and make this sketch.
3. Extrude it by 10mm.
4. On the right face sketch.
5. Make this profile on this face.
6. On the opposite face start sketch.
7. Make this profile.
8. Choose Boundary cut in Features tab.

How do you use the boundary feature in SolidWorks?

Step 1: Create New Part File

1. Step 2: Draw Two Sketch Profiles. For creating the closed profile (e.g.: circle), you have to go to the sketch toolbar and select “Circle sketch tool” from it. …
2. Step 3: Select SolidWorks Boundary Boss or Base Features Tool. …
3. Step 4: Apply Boundary Boss or Base Feature Tool.

What is boundary boss in SolidWorks?

The SOLIDWORKS Boundary Boss Base tool is an often overlooked, but very useful tool found on the features toolbar. It’s very similar to the lofted boss base tool and it’s possible to create pretty much the same geometry (with subtle differences) with both.

How do I cut a surface in SolidWorks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

How do you use the lofted boss base in SolidWorks?

How to create a Lofted Boss/Base in SolidWorks:

1. Sketch your profiles. A minimum of two are required but a higher number of profiles allows you to create more complex shapes. …
2. Select the Loft Feature, then choose the profiles in order. …
3. Adjust the Constraints and options as required.

What is boundary SolidWorks?

A boundary spans two or more profiles in one or two directions. A boundary can be a base, boss, cut, or surface. Boundaries follow the profiles specified in Direction 1 (blue) and Direction 2 (purple). The Boundary Surface feature can create surfaces that span the extents of Direction 1 and Direction 2.

What is difference between loft and boundary boss in SolidWorks?

In loft feature, you have the control of tangency magnitude and the direction in start and end. You can’t control the tangency of the profiles that are between the start and end profile curvature. While in boundary feature, you have the control of tangency of one or more profiles in one or two directions.

How do you cut a shape in SolidWorks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.